Elk ELK-M1KAM Single Door Access Module

MPN: M1KAM
JMAC ID: 200087997

$169.07

+ Free Shipping

JMAC_ID:: 200087997
df_manual_boost:: 1.75

Product Resources

We're here to help

Request a Quote

Low Price Guarantee

The ELK-M1KAM is a single door access module that accepts 26-bit wiegand card swipe or proximity readers.

Compatible with M1 and M1EZ8 control panels, the M1KAM installs on the data bus in place of a keypad and offers an inexpensive access control solution in commercial and institutional environments.

UPC: 762158550522
Also known as: EK-M1KAM

Technical Specifications:

Maximum number of access modules and keypads per system: 16
Current Draw: Less than 30 mA with min. activity, 44 mA fully active
Operating Voltage: 13.8 VDC
Connections: Unpluggable Screw Terminals, 16 Position
Circuit Board Dimensions: 3.95" x 2.875" x .95"
Housing Dimensions: 4.25" x 6.375" x 2.125"

For more information about the Elk M1KAM, please contact us.

Hardware Watchdog Circuit
Low Current (10mA) Switched Negative (pull to ground) Output for “System Armed” indication
Supervised Input for RTE (Request To Exit) Button/Device
Supervised Input for Door Status Sensor
Installs in place of an M1 Keypad and operates from the RS-485 4-Wire Keypad Data Bus
Four selectable Time settings for "Request to Exit" and "Door Held Open"
Low Current (10mA) Switched Negative (pull to ground) Output for “System Ready To Arm” indication
Input for a 26 bit Wiegand Reader, such as ELK-106055
Input for a Dallas "One-Wire" iButton Reader, such as ELK-MA110
Heavy Duty Form "C" Relay Contacts for Switching Door Strike Power
Low Current (50mA) Switched Negative (pull to ground) Output for “Door Held Open” Alarm