Edwards Signaling EC-100R Reflective Beam Smoke Detector

The EDWARDS-SIGNALING-EC-100R is a beam smoke detector that comprises a transmitter and receiver in a single enclosure and is usually installed between 19 inches and 24 inches below the ceiling. The unit is equipped with a test filter and four reflectors.

The EC-100R emits an invisible infrared light beam that is reflected through a prism mounted directly opposite and with a clear line of sight. The reflected infrared light is detected by the receiver and analyzed.

Smoke in the beam path will reduce the received infrared light proportionally to the density of the smoke. The detector analyzes this attenuation or obscuration of light and acts accordingly.

The EC-100R is ideal for large open areas such as warehouses, hotel atriums, industrial plants and school gymnasiums. The detector is often mounted within 30 feet (9.14 m) of a potential fire source.

UPC: 0793017005808
Also known as: ED-EC100R, EC100R

Technical Specifications: Beam Coverage; Width: 30 ft (9.14 m) either side of beam; Length: 160 ft to 330 ft (48.77m to 100m) Operating Humidity: 93% RH, Non-condensing Operating Temperature: 32°F to 100°F (0°C to 37°C) Weight: 1.5 lb (0.68 kg) Dimensions (HxWxD): 8.25 in x 5.1 in x 4.7 in (21 cm x 13 cm x 12 cm) Reset Time: >5 seconds (power down) Signal Delay: Alarm and trouble: 10 seconds Contacts: Alarm - Normally Open, rated 2A, 30 VDC, resistive; Trouble - Normally Closed, rated 2A, 30 VDC, resistive Current Standby: Less than 4 mA, Alarm/Trouble: Less than 14 mA Power Supply 10.2 VDC to 30 VDC (continuous power)

For more information about the Edwards Signaling EC-100R, please contact us.