Ecolink WST-200 433 MHz Wireless Door and Window Sensor

  • MPN: WST-200
  • JMAC ID: 202445829
$13.50
In Stock
  • Expedited Shipping Available Expedited Shipping Available
  • Need it Tomorrow?
    Need it Tomorrow?
    Select the NEED IT FAST shipping option at checkout and a member of our team will contact you promptly with any available Expedited Shipping options once we receive your order.
JMAC_ID:
202445829
df_manual_boost:
1.00
Please Note: In order to keep our prices low, we have a minimum order requirement of $99

The Ecolink WST-200 is a compact wireless door and window contact sensor designed for intrusion detection systems using DSC-compatible 433 MHz wireless receivers. Operating at 433.92 MHz, it uses a magnetic reed switch to detect door or window openings with a maximum magnet gap of 5/8 inch. The sensor features a replaceable 3V CR2032 lithium battery, up to 5-year battery life, tamper detection, low-battery reporting, and interchangeable white and brown covers for residential and commercial security installations.

Ecolink WST-200 Wireless Door and Window Contact Sensor, 433 MHz

The Ecolink WST-200 wireless door and window sensor provides magnetic contact monitoring for residential and commercial intrusion alarm systems. Designed for compatibility with DSC 433 MHz wireless receivers, the sensor detects changes in door or window position and transmits status information to the connected security system. Its magnetic reed switch works with a separate rare-earth magnet to identify when a protected opening moves beyond the allowable sensing distance. The 5/8-inch (0.625-inch) maximum magnet gap supports installation on compatible doors, windows, and other monitored openings. The compact surface-mounted design measures just 2.25 inches long, 1 inch wide, and 0.25 inches deep, allowing the sensor to fit on narrow frames while maintaining a low-profile appearance.

The WST-200 operates at a 433.92 MHz wireless frequency and is powered by a single 3V CR2032 replaceable lithium coin-cell battery. Ecolink specifies an expected battery life of up to 5 years under typical operating conditions, reducing routine maintenance requirements. The sensor transmits supervisory signals approximately every 60 minutes to support wireless communication monitoring by compatible alarm equipment. Additional security functions include low-battery reporting and cover tamper detection, which notify the alarm control panel when battery replacement is required or the sensor housing is opened. Operating specifications include a temperature range of 32 F to 120 F (0 C to 49 C) and relative humidity from 5% to 95%, non-condensing. The device carries FCC and Industry Canada regulatory approvals for wireless operation.

The Ecolink WST-200 surface-mount magnetic contact features a sensor housing measuring 2.25 x 1 x 0.25 inches and a matching magnet measuring 1.37 x 0.5 x 0.25 inches. Installation uses the included double-sided adhesive tape to attach the transmitter to the stationary door or window frame and the magnet to the moving surface. The magnet must face the sensor's designated reed-switch side, identified by three alignment marks, and remain within 5/8 inch of the transmitter when the opening is closed. Each sensor includes a unique six-digit identification number used for enrollment with compatible DSC control panels and wireless receivers. The factory-installed white housing can be changed to the included brown cover, providing two finish options without replacing the sensor electronics.

The Ecolink WST-200 433 MHz wireless security contact supports perimeter intrusion detection for entry doors, patio doors, windows, and other accessible openings monitored by compatible DSC security systems. Its wireless communication eliminates the need to run signal wiring between the sensor and alarm panel, simplifying installations where concealed wiring is impractical. The included magnet, interchangeable housing covers, and adhesive mounting materials support installation on common residential and commercial door and window frames. The sensor is designed specifically for DSC-compatible 433 MHz wireless systems and is not interchangeable with Ecolink contacts using 319.5 MHz or 345 MHz protocols. Installers must verify receiver compatibility, complete the enrollment process, and test magnet alignment and wireless communication before placing the device into service.




Also known as: WST200



For more information about the ECOLINK WST-200, please contact us.
Live Chat