516-812-0917
Help
Live Chat
Dynalock 7025-LED-WPC-US4 Keyswitch, Single Gange, 2 DPDT Switches, Bi-Colored LED Indicator, Weatherproof Cover, Satin Brass
-
MPN: 7025 LED WPC US4
-
JMAC ID: 200525521
The Dynalock 7025-LED-WPC-US4 is a keyswitch with one maintained and one momentary DPDT contact. The unit may be used to control electric locks, shunt or activate security panels/consoles or any similar requirements.
The 7025-LED-WPC-US4 is equipped with a bi-color LED indicator with red & green illumination and a weatherproof cover. The LED component is 12 or 24 VDC field-selectable. The unit features a satin brass finish.
The 7025-LED-WPC-US4 is supplied with face plate, bracketry, locknut and one or two switches depending upon model ordered. The user typically supplies the key cylinder and cam when master-keying a system.
Also known as: 7025LEDWPCUS4
For more information about the Dynalock 7025 LED WPC US4, please contact us.
The 7025-LED-WPC-US4 is equipped with a bi-color LED indicator with red & green illumination and a weatherproof cover. The LED component is 12 or 24 VDC field-selectable. The unit features a satin brass finish.
The 7025-LED-WPC-US4 is supplied with face plate, bracketry, locknut and one or two switches depending upon model ordered. The user typically supplies the key cylinder and cam when master-keying a system.
Also known as: 7025LEDWPCUS4
For more information about the Dynalock 7025 LED WPC US4, please contact us.
- Satin brass finish
- Are shipped with 6” long factory wired color-coded 18 ga. leads
- Switch capacity 6 amps at 125 volts
- Tamper Resistant: All visible screws are spanner head
- Rotating the key to its stop changes the state of the contact while the key is held in that position. Rotating the key back to vertical returns the switch contact to its original state. Key is removable in the vertical position
- Rotating the key to its stop and back to vertical changes the state of the switch contact. To return the contact to its original state this procedure must be repeated. Key is removable in the vertical position
- combinations
- Switches are available in momentary functions, with single pole contacts and may be ordered in varying
- Keyswitch readily accepts any standard 1-1/8” or 1-1/4” long mortise key cylinder fitted with a specified “bat” type cam
- Weatherproof cover
- Bi-color LED indicator, red/green illumination, 12 or 24 VDC field-selectable
- One DPDT momentary & one DPDT maintained switch
- Single gang faceplate
Other products from Dynalock
Customer Reviews
(No reviews yet)
Write a Review
