516-812-0917
Help
Live Chat
Dynalock 7025-CYL-LED Keyswitch, Single Gange, 2 DPDT Switches, Mortise Key Cylinder, Bi-Colored LED Indicator, Satin Stainless Steel
-
MPN: 7025-LED-CYL
-
JMAC ID: 200060853
The Dynalock 7025-CYL-LED is a keyswitch with one maintained and one momentary DPDT contact. The unit may be used to control electric locks, shunt or activate security panels/consoles or any similar requirements.
The 7025-CYL-LED is equipped with a mortise key cylinder with two keys and a bi-color LED indicator with red & green illumination. The LED component is 12 or 24 VDC field-selectable.
The 7025-CYL-LED is supplied with face plate, bracketry, locknut and one or two switches depending upon model ordered. The user typically supplies the key cylinder and cam when master-keying a system.
Also known as: DY-7025LEDCY, 7025LEDCYL
For more information about the Dynalock 7025-LED-CYL, please contact us.
The 7025-CYL-LED is equipped with a mortise key cylinder with two keys and a bi-color LED indicator with red & green illumination. The LED component is 12 or 24 VDC field-selectable.
The 7025-CYL-LED is supplied with face plate, bracketry, locknut and one or two switches depending upon model ordered. The user typically supplies the key cylinder and cam when master-keying a system.
Also known as: DY-7025LEDCY, 7025LEDCYL
For more information about the Dynalock 7025-LED-CYL, please contact us.
- Satin stainless steel finish
- Are shipped with 6” long factory wired color-coded 18 ga. leads
- Switch capacity 6 amps at 125 volts
- Tamper Resistant: All visible screws are spanner head
- Rotating the key to its stop changes the state of the contact while the key is held in that position. Rotating the key back to vertical returns the switch contact to its original state. Key is removable in the vertical position
- Rotating the key to its stop and back to vertical changes the state of the switch contact. To return the contact to its original state this procedure must be repeated. Key is removable in the vertical position
- combinations
- Switches are available in momentary functions, with single pole contacts and may be ordered in varying
- Keyswitch readily accepts any standard 1-1/8” or 1-1/4” long mortise key cylinder fitted with a specified “bat” type cam
- Bi-color LED indicator, red/green illumination, 12 or 24 VDC field-selectable
- Mortise key cylinder, 1-1/4” long with cam and two keys
- One DPDT momentary & one DPDT maintained switch
- Single gang faceplate
Other products from Dynalock
Customer Reviews
2 Reviews
-
DYNALOCK-7025-LED-CYL
-
DYNALOCK-7025-LED-CYL
