516-812-0917
Help
Live Chat
Dynalock 7023-LED-DBL Keyswitch, Double Gang, Two DPDT Maintained Switches, Bi-Color LED Indicator, Satin Stainless Steel
-
MPN: 7023-US32D-DBL-LED
-
JMAC ID: 200463899
The Dynalock 7023-LED-DBL is a keyswitch with two maintained DPDT contacts. The unit may be used to control electric locks, shunt or activate security panels/consoles or any similar requirements.
The 7023-LED-DBL is equipped with a bi-color LED indicator with red & green illumination. The LED component is 12 or 24 VDC field-selectable.
The 7023-LED-DBL is supplied with a double gang faceplate, bracketry, locknut and one or two switches depending upon model ordered. The user typically supplies the key cylinder and cam when master-keying a system.
UPC: 609010740373
Also known as: DY-723US32DD, 7023US32DDBLLED
For more information about the Dynalock 7023-US32D-DBL-LED, please contact us.
The 7023-LED-DBL is equipped with a bi-color LED indicator with red & green illumination. The LED component is 12 or 24 VDC field-selectable.
The 7023-LED-DBL is supplied with a double gang faceplate, bracketry, locknut and one or two switches depending upon model ordered. The user typically supplies the key cylinder and cam when master-keying a system.
UPC: 609010740373
Also known as: DY-723US32DD, 7023US32DDBLLED
For more information about the Dynalock 7023-US32D-DBL-LED, please contact us.
- Satin stainless steel finish
- Tamper Resistant: All visible screws are spanner head
- Rotating the key to its stop changes the state of the contact while the key is held in that position. Rotating the key back to vertical returns the switch contact to its original state. Key is removable in the vertical position
- Rotating the key to its stop and back to vertical changes the state of the switch contact. To return the contact to its original state this procedure must be repeated. Key is removable in the vertical position
- combinations
- Switches are available in momentary functions, with single pole contacts and may be ordered in varying
- Double gang faceplate
- Are shipped with 6” long factory wired color-coded 18 ga. leads
- Switch capacity 6 amps at 125 volts
- Keyswitch readily accepts any standard 1-1/8” or 1-1/4” long mortise key cylinder fitted with a specified “bat” type cam
- Two DPDT maintained switches
- Bi-color LED indicator, red/green illumination, 12 or 24 VDC field-selectable
Other products from Dynalock
Customer Reviews
(No reviews yet)
Write a Review
