516-812-0917
Help
Live Chat
Expedited Shipping Available
Dynalock 7023-LED Keyswitch, Single Gang, Two DPDT Maintained Switches, Bi-Color LED Indicator, Satin Stainless Steel
-
MPN: 7023 LED
-
JMAC ID: 200317167
The Dynalock 7023-LED is a keyswitch with two maintained DPDT contacts. The unit may be used to control electric locks, shunt or activate security panels/consoles or any similar requirements.
The 7023-LED is equipped with a bi-color LED indicator with red & green illumination. The LED component is 12 or 24 VDC field-selectable.
The 7023-LED is supplied with face plate, bracketry, locknut and one or two switches depending upon model ordered. The user typically supplies the key cylinder and cam when master-keying a system.
Also known as: 7023LED
For more information about the Dynalock 7023 LED, please contact us.
The 7023-LED is equipped with a bi-color LED indicator with red & green illumination. The LED component is 12 or 24 VDC field-selectable.
The 7023-LED is supplied with face plate, bracketry, locknut and one or two switches depending upon model ordered. The user typically supplies the key cylinder and cam when master-keying a system.
Also known as: 7023LED
Technical Specifications:
|
For more information about the Dynalock 7023 LED, please contact us.
- Are shipped with 6” long factory wired color-coded 18 ga. leads
- Switch capacity 6 amps at 125 volts
- Tamper Resistant: All visible screws are spanner head
- Rotating the key to its stop changes the state of the contact while the key is held in that position. Rotating the key back to vertical returns the switch contact to its original state. Key is removable in the vertical position
- Rotating the key to its stop and back to vertical changes the state of the switch contact. To return the contact to its original state this procedure must be repeated. Key is removable in the vertical position
- combinations
- Switches are available in momentary functions, with single pole contacts and may be ordered in varying
- Keyswitch readily accepts any standard 1-1/8” or 1-1/4” long mortise key cylinder fitted with a specified “bat” type cam
- Bi-color LED indicator, red/green illumination, 12 or 24 VDC field-selectable
- Two DPDT maintained switches
- Single gang faceplate
- Satin stainless steel finish
Other products from Dynalock
Customer Reviews
(No reviews yet)
Write a Review
