516-812-0917
Help
Live Chat
Dynalock 7021-LED-NR Keyswitch, Narrow, DPDT Momentary, Bi-Color LED Indicator, Satin Stainless Steel
-
MPN: 7021-LED-NR-US32D
-
JMAC ID: 200609888
The Dynalock 7021-LED-NR is a keyswitch with one momentary DPDT contact. The unit may be used to control electric locks, shunt or activate security panels/consoles or any similar requirements.
The 7021-LED-NR is equipped with a bi-color LED indicator with red & green illumination. The LED component is 12 or 24 VDC field-selectable. The unit features a satin stainless steel finish.
The 7021-LED-NR is supplied with a narrow faceplate, bracketry, locknut and one or two switches depending upon model ordered. The user typically supplies the key cylinder and cam when master-keying a system.
UPC: 609010734617
Also known as: 7021LEDNRUS32D
For more information about the Dynalock 7021-LED-NR-US32D, please contact us.
The 7021-LED-NR is equipped with a bi-color LED indicator with red & green illumination. The LED component is 12 or 24 VDC field-selectable. The unit features a satin stainless steel finish.
The 7021-LED-NR is supplied with a narrow faceplate, bracketry, locknut and one or two switches depending upon model ordered. The user typically supplies the key cylinder and cam when master-keying a system.
UPC: 609010734617
Also known as: 7021LEDNRUS32D
For more information about the Dynalock 7021-LED-NR-US32D, please contact us.
- Rotating the key to its stop and back to vertical changes the state of the switch contact. To return the contact to its original state this procedure must be repeated. Key is removable in the vertical position
- combinations
- Switches are available in momentary functions, with single pole contacts and may be ordered in varying
- Keyswitch readily accepts any standard 1-1/8” or 1-1/4” long mortise key cylinder fitted with a specified “bat” type cam
- Bi-color LED indicator, red/green illumination, 12 or 24 VDC field-selectable
- DPDT momentary switch
- Are shipped with 6” long factory wired color-coded 18 ga. leads
- Narrow faceplate
- Satin stainless steel finish
- Tamper Resistant: All visible screws are spanner head
- Switch capacity 6 amps at 125 volts
- Rotating the key to its stop changes the state of the contact while the key is held in that position. Rotating the key back to vertical returns the switch contact to its original state. Key is removable in the vertical position
Other products from Dynalock
Customer Reviews
(No reviews yet)
Write a Review
