• Home
  • Shop by Brands
  • Dynalock
  • Dynalock 7021-ATS-CYL-LED Keyswitch, Single Gang, DPDT Momentary, Anti-Tamper Switch, Mortise Key Cylinder, Bi-Color LED Indicator, Satin Stainless Steel

Dynalock 7021-ATS-CYL-LED Keyswitch, Single Gang, DPDT Momentary, Anti-Tamper Switch, Mortise Key Cylinder, Bi-Color LED Indicator, Satin Stainless Steel

  • MPN: 7021-CYL-ATS-LED
  • JMAC ID: 200592404
Dynalock 7021-ATS-CYL-LED Keyswitch, Single Gang, DPDT Momentary, Anti-Tamper Switch, Mortise Key Cylinder, Bi-Color LED Indicator, Satin Stainless Steel
$210.00
JMAC_ID:
200592404
df_manual_boost:
1.50
Customer Service
We're here to help
Request a Quote
Low price guarantee Low Price Guarantee
The Dynalock 7021-ATS-CYL-LED is a keyswitch equipped with one DPDT momentary contact. The unit may be used to control electric locks, shunt or activate security panels/consoles or any similar requirements. The assembly is supplied with face plate, bracketry, locknut and one or two switches depending upon model ordered. The unit also comes equipped with an anti-tamper switch, mortise key cylinder and a bi-color LED indicator. The user typically supplies the key cylinder and cam when master-keying a system. The keyswitch features a satin stainless steel finish.

UPC: 609010734143
Also known as: 7021CYLATSLED



For more information about the Dynalock 7021-CYL-ATS-LED, please contact us.
  • combinations
  • Switch capacity 6 amps at 125 volts
  • Are shipped with 6” long factory wired color-coded 18 ga. leads
  • Tamper Resistant: All visible screws are spanner head
  • Rotating the key to its stop changes the state of the contact while the key is held in that position. Rotating the key back to vertical returns the switch contact to its original state. Key is removable in the vertical position
  • Rotating the key to its stop and back to vertical changes the state of the switch contact. To return the contact to its original state this procedure must be repeated. Key is removable in the vertical position
  • Switches are available in momentary functions, with single pole contacts and may be ordered in varying
  • Keyswitch readily accepts any standard 1-1/8” or 1-1/4” long mortise key cylinder fitted with a specified “bat” type cam
  • Bi-color LED indicator, red/green illumination, 12 or 24 VDC field-selectable
  • Mortise key cylinder, 1-1/4” long with cam and two keys
  • Anti-tamper switch
  • DPDT momentary switch
  • Single gang faceplate
  • Satin stainless steel finish

Other products from Dynalock

Customer Reviews

(No reviews yet) Write a Review
Live Chat