516-812-0917
Help
Live Chat
Dynalock 7021-CYL-KEY-NR Keyswitch, Narrow, DPDT Momentary, Mortise Key Cylinder, Additional Key, Satin Stainless Steel
-
MPN: 7021CYLKEYNRUS32D
-
JMAC ID: 200277778
The Dynalock 7021-CYL-KEY-NR is a keyswitch equipped with one DPDT momentary contact a mortise key cylinder with three keys and a narrow faceplate. The unit may be used to control electric locks, shunt or activate security panels/ consoles or any similar requirements. The assembly is supplied with face plate, bracketry, locknut and one or two switches depending upon model ordered. The user typically supplies the key cylinder and cam when master-keying a system. The unit features a satin stainless steel finish.
For more information about the Dynalock 7021CYLKEYNRUS32D, please contact us.
For more information about the Dynalock 7021CYLKEYNRUS32D, please contact us.
- Narrow faceplate
- Are shipped with 6” long factory wired color-coded 18 ga. leads
- Switch capacity 6 amps at 125 volts
- Tamper Resistant: All visible screws are spanner head
- Rotating the key to its stop changes the state of the contact while the key is held in that position. Rotating the key back to vertical returns the switch contact to its original state. Key is removable in the vertical position
- Rotating the key to its stop and back to vertical changes the state of the switch contact. To return the contact to its original state this procedure must be repeated. Key is removable in the vertical position
- combinations
- Switches are available in momentary functions, with single pole contacts and may be ordered in varying
- DPDT momentary switch
- Mortise key cylinder, 1-1/4” long with cam and three keys
- Keyswitch readily accepts any standard 1-1/8” or 1-1/4” long mortise key cylinder fitted with a specified “bat” type cam
- Satin stainless steel finish
Other products from Dynalock
Customer Reviews
(No reviews yet)
Write a Review
