Dynalock 7005 Keyswitch, Single Gang, Two SPDT Switches, Satin Stainless Steel
-
MPN: 7005
-
JMAC ID: 200060846
The Dynalock 7005 is a keyswitch with one momentary and one maintained SPDT contact. The unit may be used to control electric locks, shunt or activate security panels/consoles or any similar requirements. The unit features a satin stainless steel finish.
The 7005 is supplied with face plate, bracketry, locknut and one or two switches depending upon model ordered. The user typically supplies the key cylinder and cam when master-keying a system.
UPC: 609010731098
Also known as: DY-7005
For more information about the Dynalock 7005, please contact us.
The 7005 is supplied with face plate, bracketry, locknut and one or two switches depending upon model ordered. The user typically supplies the key cylinder and cam when master-keying a system.
UPC: 609010731098
Also known as: DY-7005
Technical Specifications:
|
For more information about the Dynalock 7005, please contact us.
- Tamper Resistant: All visible screws are spanner head
- Rotating the key to its stop changes the state of the contact while the key is held in that position. Rotating the key back to vertical returns the switch contact to its original state. Key is removable in the vertical position
- Switch capacity 6 amps at 125 volts
- Satin stainless steel finish
- Switches are available in momentary functions, with single pole contacts and may be ordered in varying
- Single gang faceplate
- Two SPDT switches (one maintained and one momentary)
- Keyswitch readily accepts any standard 1-1/8” or 1-1/4” long mortise key cylinder fitted with a specified “bat” type cam
- Are shipped with 6” long factory wired color-coded 18 ga. leads
- combinations
- Rotating the key to its stop and back to vertical changes the state of the switch contact. To return the contact to its original state this procedure must be repeated. Key is removable in the vertical position
2 Reviews
-
DYNALOCK-7005
-
DYNALOCK-7005