Dynalock 7005-CYL-WPC Keyswitch, Single Gang, Two SPDT Switches, Mortise Key Cylinder, Weatherproof Cover, Satin Stainless Steel

  • MPN: 7005-CYL-WPC-US32D
  • JMAC ID: 200226693
$254.00
JMAC_ID:
200226693
df_manual_boost:
1.75
The Dynalock 7005-CYL-WPC is a keyswitch equipped with one SPDT momentary and maintained contact, a mortise key cylinder with two keys and a weatherproof cover. The unit may be used to control electric locks, shunt or activate security panels/ consoles or any similar requirements. The assembly is supplied with face plate, bracketry, locknut and one or two switches depending upon model ordered. The user typically supplies the key cylinder and cam when master-keying a system. The unit features a satin stainless steel finish.


Also known as: DY-7005CYLWP, 7005CYLWPCUS32D



For more information about the Dynalock 7005-CYL-WPC-US32D, please contact us.
  • Tamper Resistant: All visible screws are spanner head
  • Switch capacity 6 amps at 125 volts
  • Are shipped with 6” long factory wired color-coded 18 ga. leads
  • Keyswitch readily accepts any standard 1-1/8” or 1-1/4” long mortise key cylinder fitted with a specified “bat” type cam
  • Satin stainless steel finish
  • Single gang faceplate
  • Two SPDT switches (one maintained and one momentary)
  • Mortise key cylinder, 1-1/4” long with cam and two keys
  • Weatherproof cover
  • Switches are available in momentary functions, with single pole contacts and may be ordered in varying
  • combinations
  • Rotating the key to its stop and back to vertical changes the state of the switch contact. To return the contact to its original state this procedure must be repeated. Key is removable in the vertical position
  • Rotating the key to its stop changes the state of the contact while the key is held in that position. Rotating the key back to vertical returns the switch contact to its original state. Key is removable in the vertical position
Live Chat