516-812-0917
Help
Live Chat
Dynalock 7005-AUD-LED-DBL Audible Keyswitch, Double Gang, Two SPDT Switches, Bi-Color LED, Satin Stainless Steel
-
MPN: 7005 AUD LED DBL
-
JMAC ID: 200317161
The Dynalock 7005-AUD-LED-DBL is a keyswitch with one momentary and one maintained SPDT contact. The unit may be used to control electric locks, shunt or activate security panels/consoles or any similar requirements.
The 7005-AUD-LED-DBL is equipped with an audible (with a 85 dB and voltage range of 1 - 28 VDC), a bi-color LED (with red/green illumination and 12 or 24 VDC field-selectable), and a double gang plate.
The 7005-AUD-LED-DBL is supplied with face plate, bracketry, locknut and one or two switches depending upon model ordered. The user typically supplies the key cylinder and cam when master-keying a system.
Also known as: 7005AUDLEDDBL
For more information about the Dynalock 7005 AUD LED DBL, please contact us.
The 7005-AUD-LED-DBL is equipped with an audible (with a 85 dB and voltage range of 1 - 28 VDC), a bi-color LED (with red/green illumination and 12 or 24 VDC field-selectable), and a double gang plate.
The 7005-AUD-LED-DBL is supplied with face plate, bracketry, locknut and one or two switches depending upon model ordered. The user typically supplies the key cylinder and cam when master-keying a system.
Also known as: 7005AUDLEDDBL
Technical Specifications:
|
For more information about the Dynalock 7005 AUD LED DBL, please contact us.
- Satin stainless steel finish
- Audible 85dB, voltage range 1-28 VDC
- Double gang faceplate
- Two SPDT switches (one maintained and one momentary)
- Rotating the key to its stop changes the state of the contact while the key is held in that position. Rotating the key back to vertical returns the switch contact to its original state. Key is removable in the vertical position
- Rotating the key to its stop and back to vertical changes the state of the switch contact. To return the contact to its original state this procedure must be repeated. Key is removable in the vertical position
- combinations
- Switches are available in momentary functions, with single pole contacts and may be ordered in varying
- Keyswitch readily accepts any standard 1-1/8” or 1-1/4” long mortise key cylinder fitted with a specified “bat” type cam
- Bi-color LED indicator, red/green illumination, 12 or 24 VDC field-selectable
- Tamper Resistant: All visible screws are spanner head
- Switch capacity 6 amps at 125 volts
- Are shipped with 6” long factory wired color-coded 18 ga. leads
Other products from Dynalock
Customer Reviews
(No reviews yet)
Write a Review
