Home
Shop by Brands
Dynalock
Miscellaneous
Key Switch
Dynalock 7002 Keyswitch, SPDT Momentary, Single Gang, Satin Stainless Steel

Dynalock 7002 Keyswitch, SPDT Momentary, Single Gang, Satin Stainless Steel

MPN: 7002
JMAC ID: 200060843

$91.50

Limited Stock

JMAC_ID:: 200060843
df_manual_boost:: 1.75

Please Note: In order to keep our prices low, we have a minimum order requirement of $99

Product Resources

We're here to help

Request a Quote

Low Price Guarantee

The Dynalock 7002 is a keyswitch equipped with one SPDT momentary contact. The unit may be used to control electric locks, shunt or activate security panels/ consoles or any similar requirements. The assembly is supplied with face plate, bracketry, locknut and one or two switches depending upon model ordered. The user typically supplies the key cylinder and cam when master-keying a system. The unit features a satin stainless steel finish.

UPC: 609010722751
Also known as: DY-7002

For more information about the Dynalock 7002, please contact us.

SPDT momentary switch
Keyswitch readily accepts any standard 1-1/8” or 1-1/4” long mortise key cylinder fitted with a specified “bat” type cam
Are shipped with 6” long factory wired color-coded 18 ga. leads
Switch capacity 6 amps at 125 volts
Tamper Resistant: All visible screws are spanner head
Rotating the key to its stop changes the state of the contact while the key is held in that position. Rotating the key back to vertical returns the switch contact to its original state. Key is removable in the vertical position
Rotating the key to its stop and back to vertical changes the state of the switch contact. To return the contact to its original state this procedure must be repeated. Key is removable in the vertical position
combinations
Switches are available in momentary functions, with single pole contacts and may be ordered in varying
Satin stainless steel finish
Single gang faceplate