Dynalock 7001-CYL-KEY Keyswitch, Single Gang, SPDT Maintained, Mortise Key Cylinder, Additional Key, Satin Stainless Steel Also known as: DY-7001CYLKE The Dynalock 7001-CYL-KEY is a keyswitch equipped with one SPDT maintained contact, a mortise key cylinder and an additional key. The unit may be used to control electric locks, shunt or activate security panels/ consoles or any similar requirements. The assembly is supplied with face plate, bracketry, locknut and one or two switches depending upon model ordered. The user typically supplies the key cylinder and cam when master-keying a system. The unit features a satin stainless steel finish. |
Features:
- Satin stainless steel finish
- SPDT maintained switch
- Mortise key cylinder, 1-1/4 long with cam and two keys
- Equipped with an additional key for the cylinder
- Single gang faceplate
- Keyswitch readily accepts any standard 1-1/8 or 1-1/4 long mortise key cylinder fitted with a specified bat type cam
- Switches are available in momentary functions, with single pole contacts and may be ordered in varying
- combinations
- Rotating the key to its stop and back to vertical changes the state of the switch contact. To return the contact to its original state this procedure must be repeated. Key is removable in the vertical position
- Rotating the key to its stop changes the state of the contact while the key is held in that position. Rotating the key back to vertical returns the switch contact to its original state. Key is removable in the vertical position
- Tamper Resistant: All visible screws are spanner head
- Switch capacity 6 amps at 125 volts
- Are shipped with 6 long factory wired color-coded 18 ga. leads
|