516-812-0917
Help
Live Chat
Dynalock 3121B-US10B Delay Egress System Electromagnetic Lock, Double Outswinging Door, Double Coil, Oil Rubbed Bronze
-
MPN: 3121B-US10B
-
JMAC ID: 200226632
The 3121B-US10B is designed to satisfy life safety codes and high security needs at the same time. The next generation 3121B system offers better technology, resistance to electrical surges, and a virtually maintenance free sensing system. The unit features an oil rubbed bronze finish. The 3121B-US10B is designed for double outswinging doors and does not feature a center mullion.
In a typical installation, the door is normally closed and latched by the existing mechanical door hardware and magnetically secured by the 3121B Lock. Attempting to exit by applying 15Lbs. or less pressure to the door will cause the door to become unlatched, and activate the 3121B delay egress timer. The audible and red LED will pulsate for 15 seconds (30 seconds field selectable). After the time delay has elapsed, the lock will release and the audible will sound continuously with a green LED until the door is shut and the lock is reset. Reset and/or bypass are accomplished with a built-in keyswitch or remote signal. The system unlocks automatically when the 3121B is integrated with the building emergency fire alarm system or power is removed. Fire alarm contacts on the 3121B Lock are field selectable for NO and NC signals.
UPC: 609010405005
Also known as: DY-3121BUS10, 3121BUS10B
For more information about the Dynalock 3121B-US10B, please contact us.
In a typical installation, the door is normally closed and latched by the existing mechanical door hardware and magnetically secured by the 3121B Lock. Attempting to exit by applying 15Lbs. or less pressure to the door will cause the door to become unlatched, and activate the 3121B delay egress timer. The audible and red LED will pulsate for 15 seconds (30 seconds field selectable). After the time delay has elapsed, the lock will release and the audible will sound continuously with a green LED until the door is shut and the lock is reset. Reset and/or bypass are accomplished with a built-in keyswitch or remote signal. The system unlocks automatically when the 3121B is integrated with the building emergency fire alarm system or power is removed. Fire alarm contacts on the 3121B Lock are field selectable for NO and NC signals.
UPC: 609010405005
Also known as: DY-3121BUS10, 3121BUS10B
For more information about the Dynalock 3121B-US10B, please contact us.
- Selectable Nuisance Delay: 1 or 3 second to deter false alarms.
- Watchdog Circuit: Will signal malfunction with pulsating LED and audible for maximum dependability.
- Low Installation Cost: The user friendly micrometer style adjustment wheel simplifies calibration of delay egress sensor and works with existing door hardware. Does not require touch or electrified exit devices, electric hinges, door cords or special power supplies.
- Microprocessor Controlled: An advanced digital processor on-board manages all lock functions, without the need for an external system controller. Custom factory programs are available to meet varying job requirements and local building codes.
- Oil rubbed bronze finish
- Master/slave configuration
- Mounts to the underside of the frame header
- Double coil
- No center mullion
- Double outswinging door
- Holding Force: 1500 Lbs. high security holding force per lock effectively deters forced access or egress.
- Lifetime Warranty - American Made in the USA by DynaLock, with over 20 years experience in the manufacture of electromagnetic locks.
- Opto-Electronic System Sensor: Featuring a new concealed optical sensor unaffected by wind, warpage or door sag.
Other products from Dynalock
Customer Reviews
(No reviews yet)
Write a Review
