516-812-0917
Help
Live Chat
Dynalock 3121B2-US28-ATS2-DYN2-DSM2
-
MPN: 3121B2-US28-ATS2-DYN2-DSM2
-
JMAC ID: 200420793
The Dynalock 3121B2US28ATS2DYN2DSM2 is designed to satisfy life safety codes and high security needs at the same time. The next generation 3101B system offers better technology, resistance to electrical surges, and a virtually maintenance free sensing system.
In a typical installation, the door is normally closed and latched by the existing mechanical door hardware and magnetically secured by the 3101B Lock. Attempting to exit by applying 15Lbs. or less pressure to the door will cause the door to become unlatched, and activate the 3101B delay egress timer. The audible and red LED will pulsate for 15 seconds (30 seconds field selectable). After the time delay has elapsed, the lock will release and the audible will sound continuously with a green LED until the door is shut and the lock is reset. Reset and/or bypass are accomplished with a built-in keyswitch or remote signal. The system unlocks automatically when the 3101B is integrated with the building emergency fire alarm system or power is removed. Fire alarm contacts on the 3101B Lock are field selectable for NO and NC signals.
The 3121B2US28ATS2DYN2DSM2 is designed for a double outswinging door and is equipped with a center mullion, anti-tamper switch, door status switch and a Dynastat force sensor. The unit features a satin aluminum finish.
Also known as: DY-3121B2US2, 3121B2US28ATS2DYN2DSM2
For more information about the Dynalock 3121B2-US28-ATS2-DYN2-DSM2, please contact us.
In a typical installation, the door is normally closed and latched by the existing mechanical door hardware and magnetically secured by the 3101B Lock. Attempting to exit by applying 15Lbs. or less pressure to the door will cause the door to become unlatched, and activate the 3101B delay egress timer. The audible and red LED will pulsate for 15 seconds (30 seconds field selectable). After the time delay has elapsed, the lock will release and the audible will sound continuously with a green LED until the door is shut and the lock is reset. Reset and/or bypass are accomplished with a built-in keyswitch or remote signal. The system unlocks automatically when the 3101B is integrated with the building emergency fire alarm system or power is removed. Fire alarm contacts on the 3101B Lock are field selectable for NO and NC signals.
The 3121B2US28ATS2DYN2DSM2 is designed for a double outswinging door and is equipped with a center mullion, anti-tamper switch, door status switch and a Dynastat force sensor. The unit features a satin aluminum finish.
Also known as: DY-3121B2US2, 3121B2US28ATS2DYN2DSM2
For more information about the Dynalock 3121B2-US28-ATS2-DYN2-DSM2, please contact us.
- manufacture of electromagnetic locks
- Holding Force: 1500 Lbs. high security holding force per lock effectively deters forced access or egress
- Opto-Electronic System Sensor: Featuring a new concealed optical sensor unaffected by wind, warpage or door sag
- Selectable Nuisance Delay: 1 or 3 second to deter false alarms
- Watchdog Circuit: Will signal malfunction with pulsating LED and audible for maximum dependability
- Low Installation Cost: The user friendly micrometer style adjustment wheel simplifies calibration of delay egress sensor and works with existing door hardware Does not require touch or electrified exit devices, electric hinges, door cords or special power supplies
- Microprocessor Controlled: An advanced digital processor on-board manages all lock functions, without the need for an external system controller. Custom factory programs are available to meet varying job requirements and local building codes
- Lifetime Warranty - American Made in the USA by DynaLock, with over 20 years experience in the
Other products from Dynalock
