Dynalock 3101B-US4 Delay Egress System Electromagnetic Lock, Single Outswinging Door, Single Coil, Bright Brass

  • MPN: 3101B-US4
  • JMAC ID: 200060655
$1,038.00
JMAC_ID:
200060655
df_manual_boost:
1.75
The Dynalock 3101B-US4 delay egress system electromagnetic lock is designed to satisfy life safety codes and high security needs at the same time. The next generation 3101B system offers better technology, resistance to electrical surges, and a virtually maintenance free sensing system. The unit is designed for a single outswinging door and features a satin brass finish.

In a typical installation, the door is normally closed and latched by the existing mechanical door hardware and magnetically secured by the 3101B Lock. Attempting to exit by applying 15Lbs. or less pressure to the door will cause the door to become unlatched, and activate the 3101B delay egress timer. The audible and red LED will pulsate for 15 seconds (30 seconds field selectable). After the time delay has elapsed, the lock will release and the audible will sound continuously with a green LED until the door is shut and the lock is reset. Reset and/or bypass are accomplished with a built-in keyswitch or remote signal. The system unlocks automatically when the 3101B is integrated with the building emergency fire alarm system or power is removed. Fire alarm contacts on the 3101B Lock are field selectable for NO and NC signals.


Also known as: DY-3101BUS4, 3101BUS4



For more information about the Dynalock 3101B-US4, please contact us.
  • Mounts to the underside of the frame header
  • Opto-Electronic System Sensor: Featuring a new concealed optical sensor unaffected by wind, warpage or door sag
  • Single coil
  • Single outswinging door
  • Holding Force: 1500 Lbs. high security holding force per lock effectively deters forced access or egress
  • Selectable Nuisance Delay: 1 or 3 second to deter false alarms
  • Watchdog Circuit: Will signal malfunction with pulsating LED and audible for maximum dependability
  • Low Installation Cost: The user friendly micrometer style adjustment wheel simplifies calibration of delay egress sensor and works with existing door hardware. Does not require touch or electrified exit devices, electric hinges, door cords or special power supplies.
  • Microprocessor Controlled: An advanced digital processor on-board manages all lock functions, without the need for an external system controller. Custom factory programs are available to meet varying job requirements and local building codes
  • Satin brass finish
  • Lifetime Warranty - American Made in the USA by DynaLock, with over 20 years experience in the manufacture of electromagnetic locks

2 Reviews

  • 5
    DYNALOCK-3101B-US4

    Posted by 162555 on Oct 26th 2020

  • 5
    DYNALOCK-3101B-US4

    Posted by 108771 on Feb 8th 2017

Live Chat