516-812-0917
Help
Live Chat
Dynalock 3002-LCB-US10B Electromagnetic Lock, 1500lbs, Double Outswinging Door, Double Coil, Oil Rubbed Bronze
-
MPN: 3002 LCB US10B
-
JMAC ID: 200316732
The Dynalock 3002-LCB-US10B is a full size 1500 lbs. holding force electromagnetic lock. It is designed for life safety and high security on rated or nonrated doors and frames. Specify for commercial, industrial, or institutional openings where maximum security and durability is required. The unit features an oil rubbed bronze finish.
The 3002-LCB-US10B is designed for ease of installation with DynaLocks exclusive FasTrak mounting system, field selectable voltage, and convenient wiring compartments. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate door contacts.
The 3002-LCB-US10B is designed for double outswinging doors. The double coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The unit is equipped with a basic lock less circuit board that features coil and housing with flying leads.
Also known as: 3002LCBUS10B
For more information about the Dynalock 3002 LCB US10B, please contact us.
The 3002-LCB-US10B is designed for ease of installation with DynaLocks exclusive FasTrak mounting system, field selectable voltage, and convenient wiring compartments. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate door contacts.
The 3002-LCB-US10B is designed for double outswinging doors. The double coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The unit is equipped with a basic lock less circuit board that features coil and housing with flying leads.
Also known as: 3002LCBUS10B
Technical Specifications:
|
For more information about the Dynalock 3002 LCB US10B, please contact us.
- Mounts to the underside of the frame header
- Double outswinging door
- Double coil
- Basic lock less circuit board - coil and housing with flying leads
- Oil rubbed bronze finish
- One Piece Housing made from high strength aluminum. A seamless housing means maximum resistance to weather and tampering
- FasTrak Mounting: Speed up installation by mounting the FasTrak channel to the frame first. Lock can then be attached and removed with ease
- Universal Design: Lock handing can easily be reversed in the field, allowing placement of the coil adjacent to the vertical jamb where it will exert the most efficient force
- Low power consumption conserves energy, reduces operation cost, and extends battery backup time
- A totally plated coil and armature provides protection against corrosion
- A narrow backset of 1-1/2” may mean the elimination of other mounting brackets or filler plates
- No residual magnetism - the door releases without delay when lock is de-energized
- Built-in spike suppression protects other solid state components within the system from damage when the lock is de-energized
- Lifetime Warranty - American Made in the USA by
- DynaLock, with over 20 years experience in the manufacture of electromagnetic locks
- 3000 Series - Brochure
- 2202-392 Instructions
- 3101BxDYN Series Wiring Diagram
- 1030-RXP SYSTEM KIT Wiring Diagram
- 3006 Series - Brochure
- 2011 & 3000LC Single Outswing Electromagnetic Lock Instructions
- 1030-RXB SYSTEM KIT Wiring Diagram
- 3002 LCB US10B Data Sheet
- Installation Manual
- 6370 Series Wiring Diagram
- 2000-3000 Wiring Diagram & Instructions
Other products from Dynalock
Customer Reviews
(No reviews yet)
Write a Review
