516-812-0917
Help
Live Chat
Dynalock 3002-DSM2-US10B Electromagnetic Lock, 1500lbs, Double Outswinging Door, Double Coil, Oil Rubbed Bronze
-
MPN: 3002 DSM2 US10B
-
JMAC ID: 200316723
The Dynalock 3002-DSM2-US10B is a full size 1500 lbs. holding force electromagnetic lock. It is designed for life safety and high security on rated or nonrated doors and frames. Specify for commercial, industrial, or institutional openings where maximum security and durability is required. The unit features an oil rubbed bronze finish.
The 3002-DSM2-US10B is designed for ease of installation with DynaLocks exclusive FasTrak mounting system, field selectable voltage, and convenient wiring compartments. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate door contacts.
The 3002-DSM2-US10B is designed for double outswinging doors. The double coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The unit is equipped with a door status switch which signals if a door is closed or ajar.
Also known as: 3002DSM2US10B
For more information about the Dynalock 3002 DSM2 US10B, please contact us.
The 3002-DSM2-US10B is designed for ease of installation with DynaLocks exclusive FasTrak mounting system, field selectable voltage, and convenient wiring compartments. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate door contacts.
The 3002-DSM2-US10B is designed for double outswinging doors. The double coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The unit is equipped with a door status switch which signals if a door is closed or ajar.
Also known as: 3002DSM2US10B
Technical Specifications:
|
For more information about the Dynalock 3002 DSM2 US10B, please contact us.
- Double coil
- Mounts to the underside of the frame header
- No residual magnetism - the door releases without delay when lock is de-energized
- Double outswinging door
- Door status switch - signals if a door is closed or ajar
- Oil rubbed bronze finish
- One Piece Housing made from high strength aluminum. A seamless housing means maximum resistance to weather and tampering
- FasTrak Mounting: Speed up installation by mounting the FasTrak channel to the frame first. Lock can then be attached and removed with ease
- Universal Design: Lock handing can easily be reversed in the field, allowing placement of the coil adjacent to the vertical jamb where it will exert the most efficient force
- A narrow backset of 1-1/2” may mean the elimination of other mounting brackets or filler plates
- Low power consumption conserves energy, reduces operation cost, and extends battery backup time
- A totally plated coil and armature provides protection against corrosion
- Built-in spike suppression protects other solid state components within the system from damage when the lock is de-energized
- Lifetime Warranty - American Made in the USA by
- DynaLock, with over 20 years experience in the manufacture of electromagnetic locks
- 3000 Series - Brochure
- 3002 DSM2 US10B Data Sheet
- Installation Manual
- 4951 Series Dimensional Drawing
- 2011xTJ20 / 3000LCxTJ20 Instructions
- 2202-392 Instructions
- 2011 & 3000LC Single Outswing Electromagnetic Lock Instructions
- 6370 Series Wiring Diagram
- 2000-3000 Wiring Diagram & Instructions
- 3006 Series - Brochure
- 1030-RXB SYSTEM KIT Wiring Diagram
Other products from Dynalock
Customer Reviews
(No reviews yet)
Write a Review
