Dynalock 2585-TJ85-DSM Mini Maglock, 650lbs, Ultra-Compact, Single Inswinging Door, Single Coil, Door Status Switch, Satin Aluminum
-
MPN: 2585-TJ85 DSM
-
JMAC ID: 200316673
Each Dynalock 2585-TJ85-DSM electromagnetic lock is comprised of 3 basic components: a lock housing, an electromagnetic coil, and an armature. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The 2585-TJ85-DSM is designed for single inswinging doors and has a shorter housing. At only 8 1/2" long, the 2585 "Bantam" lock is perfect for installations where space is limited. All locks are designed for ease of use, and built in the USA to last a lifetime. The unit is equipped with a door status switch which signals if a door is closed or ajar.
Also known as: 2585TJ85DSM
For more information about the Dynalock 2585-TJ85 DSM, please contact us.
The 2585-TJ85-DSM is designed for single inswinging doors and has a shorter housing. At only 8 1/2" long, the 2585 "Bantam" lock is perfect for installations where space is limited. All locks are designed for ease of use, and built in the USA to last a lifetime. The unit is equipped with a door status switch which signals if a door is closed or ajar.
Also known as: 2585TJ85DSM
Technical Specifications:
|
For more information about the Dynalock 2585-TJ85 DSM, please contact us.
- Satin aluminum finish
- No Residual Magnetism - The lock releases without delay when de-energized.
- Mounts to the face of the frame header
- Single inswinging door
- Single coil
- Door status switch - signals if the door is closed or ajar
- Holding Force - 650 lbs. holding force provides for effective traffic control. Examples include interior office doors, clean room interlocks, tool cribs, and x-ray areas.
- 12 or 24 VDC field selectable
- Low Power Consumption conserves energy, reduces operating cost, and extends battery backup time.
- A Totally Plated Coil and armature provides protection against corrosion.
- Ultra-compact 8-1/2" long
- Narrow Backset - A thin lock section (1-1/4”) may mean the elimination of additional mounting brackets.
- Built-In Spike Suppression protects other solid state components within the system from damage when the lock is de-energized.
- 2585-TJ85 DSM Data Sheet
- Installation Manual
- 2282-TJ82 Instructions
- 2513/2513 GLB Instructions
- 2000 Series 1200 Lbs. Holding Force Electromagnetic Locks
- 2500 x LCB Series Wiring Diagram & Instructions
- 2011 Wiring Diagram & Instructions
- 2202-392 Instructions
- 2268 Instructions
- 2268-TJ10 Instructions
- 2268xDSE Instructions
- 2280 Instructions
- 2585xTH85 Instructions
- 6370 Series Wiring Diagram