516-812-0917
Help
Live Chat
Dynalock 2522-ATS2-DSM2-DYN2 Mini-Mag Electromagnetic Lock, 650lbs, Double Outswinging Door, Double Coil, Satin Aluminum
-
MPN: 2522 DSM2 DYN2 ATS2
-
JMAC ID: 200316643
Each Dynalock 2522-ATS2-DSM2-DYN2 electromagnetic lock is comprised of 3 basic components: a lock housing, an electromagnetic coil, and an armature. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The 2522-ATS2-DSM2-DYN2 is designed for use on double outswinging doors and features a satin aluminum finish. The unit is equipped with a door status switch, Dynastat force sensor and an anti-tamper switch.
Also known as: 2522DSM2DYN2ATS2
For more information about the Dynalock 2522 DSM2 DYN2 ATS2, please contact us.
The 2522-ATS2-DSM2-DYN2 is designed for use on double outswinging doors and features a satin aluminum finish. The unit is equipped with a door status switch, Dynastat force sensor and an anti-tamper switch.
Also known as: 2522DSM2DYN2ATS2
Technical Specifications:
|
For more information about the Dynalock 2522 DSM2 DYN2 ATS2, please contact us.
- A Totally Plated Coil and armature provides protection against corrosion.
- Low Power Consumption conserves energy, reduces operating cost, and extends battery backup time.
- 4 Operating Voltages - 12 or 24 VDC or VAC for installation flexibility and to reduce stock.
- Holding Force - 650 lbs. holding force provides for effective traffic control. Examples include interior office doors, clean room interlocks, tool cribs, and x-ray areas.
- Satin aluminum finish
- Dynastat force sensor - indicates an efficient magnetic bond
- Door status switch - signals if a door is closed or ajar
- Anti-tamper switch - signals removal of the wiring chamber cover
- Mounts to the underside of the frame header
- Double coil
- Double outswinging door
- Built-In Spike Suppression protects other solid state components within the system from damage when the lock is de-energized.
- No Residual Magnetism - The lock releases without delay when de-energized.
- Narrow Backset - A thin lock section (1-1/4”) may mean the elimination of additional mounting brackets.
- 2522 DSM2 DYN2 ATS2 Data Sheet
- Installation Manual
- 4951 Series Dimensional Drawing
- 2000 Series 1200 Lbs. Holding Force Electromagnetic Locks
- 2011xTJ20 / 3000LCxTJ20 Instructions
- 2013 Instructions
- 2012xTJ21 / 3001LCxTJ21 Instructions
- 2013 Series 1200 Lbs. Electromagnetic Gate Lock Holding Force
- 2011 & 3000LC Single Outswing Electromagnetic Lock Instructions
Other products from Dynalock
Customer Reviews
(No reviews yet)
Write a Review
