Dynalock 2522TJ2-DSM2-DYN2-US10 Mini-Mag Electromagnetic Lock, 650lbs, Double Inswinging Door, Double Coil, Satin Bronze
-
MPN: 2522TJ2 US10 DSM2 DYN2
-
JMAC ID: 200316661
Each Dynalock 2522TJ2-DSM2-DYN2-US10 electromagnetic lock is comprised of 3 basic components: a lock housing, an electromagnetic coil, and an armature. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The 2522TJ2-DSM2-DYN2-US10 is designed for use on double inswinging doors and features a satin bronze finish. The unit is equipped with a door status switch and a Dynastat force sensor.
Also known as: 2522TJ2US10DSM2DYN2
For more information about the Dynalock 2522TJ2 US10 DSM2 DYN2, please contact us.
The 2522TJ2-DSM2-DYN2-US10 is designed for use on double inswinging doors and features a satin bronze finish. The unit is equipped with a door status switch and a Dynastat force sensor.
Also known as: 2522TJ2US10DSM2DYN2
Technical Specifications:
|
For more information about the Dynalock 2522TJ2 US10 DSM2 DYN2, please contact us.
- Narrow Backset - A thin lock section (1 1/4”) may mean the elimination of additional mounting brackets
- Mounts to the face of the frame header
- Door status switch - signals if a door is closed or ajar
- Dynastat force sensor - indicates an efficient magnetic bond
- Satin bronze finish
- Holding Force - 650 lbs. holding force provides for effective traffic control. Examples include interior office doors, clean room interlocks, tool cribs, and x-ray areas
- 4 Operating Voltages - All models offer 12 or 24 VDC or VAC for installation flexibility and to reduce stock
- Low Power Consumption conserves energy, reduces operating cost, and extends battery backup time
- A Totally Plated Coil and armature provides protection against corrosion
- No Residual Magnetism - The lock releases without delay when de-energized
- Built-In Spike Suppression protects other solid state components within the system from damage when the lock is de-energized
- Double coil
- Double inswinging door
- 2522TJ2 US10 DSM2 DYN2 Data Sheet
- Installation Manual
- 4951 Series Dimensional Drawing
- 2000 Series 1200 Lbs. Holding Force Electromagnetic Locks
- 2013 Series 1200 Lbs. Electromagnetic Gate Lock Holding Force
- 2011 & 3000LC Single Outswing Electromagnetic Lock Instructions
- 2013 Instructions
- 2011xTJ20 / 3000LCxTJ20 Instructions
- 2012xTJ21 / 3001LCxTJ21 Instructions