Dynalock 2511-US10 Mini-Mag Electromagnetic Lock, 650lbs, Single Outswinging Door, Single Coil, Satin Bronze
-
MPN: 2511 US10
-
JMAC ID: 200316615
Each Dynalock 2511-US10 electromagnetic lock is comprised of 3 basic components: a lock housing, an electromagnetic coil, and an armature. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The 2511-US10 is designed for use on single outswinging doors and features a satin bronze finish.
Also known as: 2511US10
For more information about the Dynalock 2511 US10, please contact us.
The 2511-US10 is designed for use on single outswinging doors and features a satin bronze finish.
Also known as: 2511US10
Technical Specifications:
|
For more information about the Dynalock 2511 US10, please contact us.
- Low Power Consumption conserves energy, reduces operating cost, and extends battery backup time.
- Holding Force - 650 lbs. holding force provides for effective traffic control. Examples include interior office doors, clean room interlocks, tool cribs, and x-ray areas.
- Satin bronze finish
- A Totally Plated Coil and armature provides protection against corrosion.
- Built-In Spike Suppression protects other solid state components within the system from damage when the lock is de-energized.
- Narrow Backset - A thin lock section (1-1/4”) may mean the elimination of additional mounting brackets.
- No Residual Magnetism - The lock releases without delay when de-energized.
- Mounts to the underside of the frame header
- Single coil
- 4 Operating Voltages - 12 or 24 VDC or VAC for installation flexibility and to reduce stock.
- Single outswinging door
- 2511 US10 Data Sheet
- Installation Manual
- 2513/2513 GLB Instructions
- 2282-TJ82 Instructions
- 2500 x LCB Series Wiring Diagram & Instructions
- 2000 Series 1200 Lbs. Holding Force Electromagnetic Locks
- 2268 Instructions
- 2202-392 Instructions
- 2268-TJ10 Instructions
- 2268xDSE Instructions
- 2280 Instructions
- 2585 Instructions
- 2585xTH85 Instructions