Dynalock 2511TJ-US19 Mini-Mag Electromagnetic Lock, 650lbs, Single Inswinging Door, Single Coil, Flat Black Coated
-
MPN: 2511TJ US19
-
JMAC ID: 200316633
Each Dynalock 2511TJ-US19 electromagnetic lock is comprised of 3 basic components: a lock housing, an electromagnetic coil, and an armature. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The 2511TJ-US19 is designed for use on single inswinging doors and features a flat black coated finish.
Also known as: 2511TJUS19
For more information about the Dynalock 2511TJ US19, please contact us.
The 2511TJ-US19 is designed for use on single inswinging doors and features a flat black coated finish.
Also known as: 2511TJUS19
Technical Specifications:
|
For more information about the Dynalock 2511TJ US19, please contact us.
- Built-In Spike Suppression protects other solid state components within the system from damage when the lock is de-energized.
- Narrow Backset - A thin lock section (1-1/4”) may mean the elimination of additional mounting brackets.
- No Residual Magnetism - The lock releases without delay when de-energized.
- A Totally Plated Coil and armature provides protection against corrosion.
- Low Power Consumption conserves energy, reduces operating cost, and extends battery backup time.
- 4 Operating Voltages - 12 or 24 VDC or VAC for installation flexibility and to reduce stock.
- Holding Force - 650 lbs. holding force provides for effective traffic control. Examples include interior office doors, clean room interlocks, tool cribs, and x-ray areas.
- Flat black coated finish
- Mounts to the face of the frame header
- Single coil
- Single inswinging door
- 2511TJ US19 Data Sheet
- Installation Manual
- 2513/2513 GLB Instructions
- 2282-TJ82 Instructions
- 2000 Series 1200 Lbs. Holding Force Electromagnetic Locks
- 2500 x LCB Series Wiring Diagram & Instructions
- 2500 & 2280 Series Wiring Diagram & Instructions
- 2202-392 Instructions
- 2268 Instructions
- 2268-TJ10 Instructions
- 2268xDSE Instructions
- 2280 Instructions
- 2585 Instructions
- 2585xTH85 Instructions