Dynalock 2268-10-ATS Low Profile Electromagnetic Lock, 1200lbs, Single Outswinging Door, Single Coil, Anti-Tamper Switch, Satin Aluminum
-
MPN: 2268-10 ATS
-
JMAC ID: 200316588
The Dynalock 2268-10-ATS is a full size 1200 lb. holding force electromagnet. It is designed for life safety and high security on rated or nonrated doors and frames. With a low 2 profile, the 2268 is perfect for opening heights of 7 or less to facilitate code compliance on designated egress doors.
The 2268-10-ATS is field selectable for 12VDC or 24VDC. Specify the RC option for AC voltage operation. Surge suppression is built-in and 12 long color coded wire leads are provided for easy installation. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate door contacts.
The 2268-10-ATS is designed for single outswinging doors. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The unit is equipped with an anti-tamper switch which signals the removal of the housing cover.
Also known as: 226810ATS
For more information about the Dynalock 2268-10 ATS, please contact us.
The 2268-10-ATS is field selectable for 12VDC or 24VDC. Specify the RC option for AC voltage operation. Surge suppression is built-in and 12 long color coded wire leads are provided for easy installation. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate door contacts.
The 2268-10-ATS is designed for single outswinging doors. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The unit is equipped with an anti-tamper switch which signals the removal of the housing cover.
Also known as: 226810ATS
Technical Specifications:
|
For more information about the Dynalock 2268-10 ATS, please contact us.
- No residual magnetism - the lock releases without delay when de-energized
- Built-in spike suppression protects other solid state components within the system from damage when the lock is de-energized
- Non-Handed - includes a convenient area for wiring connections on each end of the lock
- Adjustable mounting base reduces installation time and insures proper alignment
- Low power consumption conserves energy, reduces operation cost, and extends battery backup time
- A totally plated coil and armature provides protection against corrosion
- Low profile provides maximum clearance for underheight door openings. The lowest profile of ANY full size electromagnetic lock
- Multiple monitoring options increases the flexibility, security and compatibility of system equipment
- 2268-10 ATS Data Sheet
- Installation Manual
- 2513/2513 GLB Instructions
- 2280 Instructions
- 2282-TJ82 Instructions
- 2500 x LCB Series Wiring Diagram & Instructions
- 2500 & 2280 Series Wiring Diagram & Instructions
- 2202-392 Instructions
- 2268-TJ10 Instructions
- 2268xDSE Instructions
- 2585 Instructions
- 2585xTH85 Instructions
- 6370 Series Wiring Diagram
- 2000-3000 Wiring Diagram & Instructions