516-812-0917
Help
Live Chat
Dynalock 2268-10-ATS-DSM-DYN-LED-RCTD
-
MPN: 2268-10-ATS-DSM-DYN-LED-RCTD
-
JMAC ID: 200420786
The Dynalock 226810ATSDSMDYNLEDRCTD is a full size 1200 lb. holding force electromagnet. It is designed for life safety and high security on rated or nonrated doors and frames. With a low 2 profile, the unit is perfect for opening heights of 7 or less to facilitate code compliance on designated egress doors.
The 226810ATSDSMDYNLEDRCTD is field selectable for 12VDC or 24VDC. Specify the RC option for AC voltage operation. Surge suppression is built-in and 12 long color coded wire leads are provided for easy installation. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate door contacts.
The 226810ATSDSMDYNLEDRCTD is offered in a single armature model for outswinging doors. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The unit is equipped with an anti-tamper switch, door status switch, Dynastat force sensor, a bi-colored LED, rectifier for AC operation and a 1-60 second time delay.
UPC: 999999421450
Also known as: DY-226810ATD, 226810ATSDSMDYNLEDRCTD
For more information about the Dynalock 2268-10-ATS-DSM-DYN-LED-RCTD, please contact us.
The 226810ATSDSMDYNLEDRCTD is field selectable for 12VDC or 24VDC. Specify the RC option for AC voltage operation. Surge suppression is built-in and 12 long color coded wire leads are provided for easy installation. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate door contacts.
The 226810ATSDSMDYNLEDRCTD is offered in a single armature model for outswinging doors. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The unit is equipped with an anti-tamper switch, door status switch, Dynastat force sensor, a bi-colored LED, rectifier for AC operation and a 1-60 second time delay.
UPC: 999999421450
Also known as: DY-226810ATD, 226810ATSDSMDYNLEDRCTD
Technical Specifications:
|
For more information about the Dynalock 2268-10-ATS-DSM-DYN-LED-RCTD, please contact us.
- Non-Handed - includes a convenient area for wiring
- connections on each end of the lock
- Adjustable mounting base reduces installation time and insures proper alignment
- Low profile provides maximum clearance for underheight door openings. The lowest profile of ANY full size electromagnetic lock
- No residual magnetism - the lock releases without delay when de-energized
- Multiple monitoring options increases the flexibility, security and compatibility of system equipment
- components within the system from damage when the lock is de-energized
- Low power consumption conserves energy, reduces operation cost, and extends battery backup time
- Built-in spike suppression protects other solid state
- A totally plated coil and armature provides protection against corrosion
- 2268-10-ATS-DSM-DYN-LED-RCTD Data Sheet
- Installation Manual
- 2011 & 3000LC Single Outswing Electromagnetic Lock Instructions
- 2013 Series 1200 Lbs. Electromagnetic Gate Lock Holding Force
- 4951 Series Dimensional Drawing
- 2011xTJ20 / 3000LCxTJ20 Instructions
- 2012xTJ21 / 3001LCxTJ21 Instructions
- 2000 Series 1200 Lbs. Holding Force Electromagnetic Locks
- 2013 Instructions
Other products from Dynalock
