Dynalock 2011-LP-US10B Electromagnetic Lock, 1200lbs, Single Outswinging Door, Low Power Coil, Oil Rubbed Bronze
-
MPN: 2011 LP US10B
-
JMAC ID: 200316517
The DYNALOCK-2011-LP-US10B is a surface mount 2000 series electromagnetic lock for outswing doors that is equipped with a single lock low power coil.
The 2011-LP-US10B's coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The lock boasts a 1200 pound holding force. Mounting is adjustable and the unit has an upgradable circuit board.
Also known as: 2011LPUS10B
For more information about the Dynalock 2011 LP US10B, please contact us.
The 2011-LP-US10B's coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The lock boasts a 1200 pound holding force. Mounting is adjustable and the unit has an upgradable circuit board.
Also known as: 2011LPUS10B
Technical Specifications:
|
For more information about the Dynalock 2011 LP US10B, please contact us.
- A narrow backset of 1-1/2” may mean the elimination of other mounting brackets or filler plates
- No residual magnetism - the door releases without delay when lock is de-energized.
- Multiple sensor and monitor options increases flexibility, security and compatibility with system equipment
- Built-in spike suppression protects other solid state components within the system from damage when the lock is de-energized
- Lifetime Warranty - American Made in the USA by DynaLock, with over 20 years experience in the manufacture of electromagnetic locks
- A totally plated coil and armature provides protection against corrosion
- Low power consumption conserves energy, reduces operation cost, and extends battery backup time
- Internal wiring compartment includes built-in circuit board attached to access cover to provide a convenient, plug in, concealed area for wiring connections
- Oil rubbed bronze finish
- Low power coil - 12V @ 0.16A, single lock
- Single coil
- Single outswinging door
- 2282-TJ82 Instructions
- 2513/2513 GLB Instructions
- 2000 Series 1200 Lbs. Holding Force Electromagnetic Locks
- 2500 x LCB Series Wiring Diagram & Instructions
- 2000-3000 Wiring Diagram & Instructions
- 2280 Instructions
- 2585xTH85 Instructions
- 2202-392 Instructions
- 2268 Instructions
- 2268-TJ10 Instructions
- 2268xDSE Instructions
- Brochure
- Installation Manual