516-812-0917
Help
Live Chat
Dynalock 2011-TJ20-HSM Electromagnetic Lock, 1200lbs, Single Inswinging Door, High Security Monitor, Satin Aluminum
-
MPN: 2011TJ20-US28-HSM
-
JMAC ID: 200060478
The Dynalock 2011-TJ20-US28-HSM is a full size 1200 lbs. holding force electromagnet. It is designed for life safety and high security on rated or nonrated doors and frames. Specify for commercial, industrial, or institutional openings when low cost and high security are required. The unit features a satin aluminum finish.
The 2011-TJ20-US28-HSM lock is designed for ease of installation with adjustable mounting, field selectable voltage, and convenient wiring compartments. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate "door contacts".
The 2011-TJ20-US28-HSM is designed for a single inswinging door. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The unit is equipped with a door status switch and Dynastat force sensor.
UPC: 999999421050
Also known as: DY-2011TJ20U, 2011TJ20US28HSM
For more information about the Dynalock 2011TJ20-US28-HSM, please contact us.
The 2011-TJ20-US28-HSM lock is designed for ease of installation with adjustable mounting, field selectable voltage, and convenient wiring compartments. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate "door contacts".
The 2011-TJ20-US28-HSM is designed for a single inswinging door. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The unit is equipped with a door status switch and Dynastat force sensor.
UPC: 999999421050
Also known as: DY-2011TJ20U, 2011TJ20US28HSM
For more information about the Dynalock 2011TJ20-US28-HSM, please contact us.
- Lifetime Warranty - American Made in the USA by DynaLock, with over 20 years experience in the manufacture of electromagnetic locks
- Multiple sensor and monitor options increases flexibility, security and compatibility with system equipment
- No residual magnetism - the door releases without delay when lock is de-energized.
- A narrow backset of 1-1/2” may mean the elimination of other mounting brackets or filler plates
- A totally plated coil and armature provides protection against corrosion
- Low power consumption conserves energy, reduces operation cost, and extends battery backup time
- Internal wiring compartment includes built-in circuit board attached to access cover to provide a convenient, plug in, concealed area for wiring connections
- Satin aluminum finish
- Dynastat force sensor - indicates efficient magnetic bond. Sensor features SPDT contacts
- Door status switch - signals if the door is closed or ajar
- Single coil
- Single inswinging door, mounts to frame header
- Built-in spike suppression protects other solid state components within the system from damage when the lock is de-energized
Other products from Dynalock
Customer Reviews
2 Reviews
-
DYNALOCK-2011TJ20-US28-HSM
-
DYNALOCK-2011TJ20-US28-HSM
