516-812-0917
Help
Live Chat
Dynalock 2011-TJ20-LCB Electromagnetic Lock, 1200lbs, Single Inswinging Door, Basic Lock Less Circuit Board, Satin Aluminum
-
MPN: 2011TJ20 LCB
-
JMAC ID: 200316535
The Dynalock 2011TJ20-LCB is a full size 1200 lbs. holding force electromagnet. It is designed for life safety and high security on rated or nonrated doors and frames. Specify for commercial, industrial, or institutional openings when low cost and high security are required. The unit features a satin aluminum finish.
The 2011TJ20-LCB lock is designed for ease of installation with adjustable mounting, field selectable voltage, and convenient wiring compartments. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate "door contacts".
The 2011TJ20-LCB is designed for a single inswinging door. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The unit is equipped with a basic lock less circuit board that contains coil and housing with flying leads.
Also known as: 2011TJ20LCB
For more information about the Dynalock 2011TJ20 LCB, please contact us.
The 2011TJ20-LCB lock is designed for ease of installation with adjustable mounting, field selectable voltage, and convenient wiring compartments. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate "door contacts".
The 2011TJ20-LCB is designed for a single inswinging door. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.
The unit is equipped with a basic lock less circuit board that contains coil and housing with flying leads.
Also known as: 2011TJ20LCB
Technical Specifications:
|
For more information about the Dynalock 2011TJ20 LCB, please contact us.
- Single inswinging door, mounts to frame header
- Single coil
- Basic Lock Less Circuit Board - Coil and housing with flying leads
- Satin aluminum finish
- Lifetime Warranty - American Made in the USA by DynaLock, with over 20 years experience in the manufacture of electromagnetic locks
- Built-in spike suppression protects other solid state components within the system from damage when the lock is de-energized
- Multiple sensor and monitor options increases flexibility, security and compatibility with system equipment
- No residual magnetism - the door releases without delay when lock is de-energized.
- A narrow backset of 1-1/2” may mean the elimination of other mounting brackets or filler plates
- A totally plated coil and armature provides protection against corrosion
- Internal wiring compartment includes built-in circuit board attached to access cover to provide a convenient, plug in, concealed area for wiring connections
- Low power consumption conserves energy, reduces operation cost, and extends battery backup time
- 2011TJ20 LCB Data Sheet
- Installation Manual
- 2513/2513 GLB Instructions
- 2282-TJ82 Instructions
- 2000 Series 1200 Lbs. Holding Force Electromagnetic Locks
- 2500 & 2280 Series Wiring Diagram & Instructions
- 2268-TJ10 Instructions
- 2202-392 Instructions
- 2268 Instructions
- 2268xDSE Instructions
- 2280 Instructions
- 2585 Instructions
- 2585xTH85 Instructions
Other products from Dynalock
Customer Reviews
(No reviews yet)
Write a Review
