 |
 |
 |
|
Ditek DTK-120HW Equipment Panel, Dedicated Circuit Surge Protector, Split Phase, 120VAC
Also known as: DTK120HW, DK-120HW, DTK-DTK120HW
The Ditek DTK-120HW is a parallel mount surge protector compatible with 120V fire systems. Part of Ditek's HW series, the 120HW is manufactuared to meet the highest standards of the life safety industy, providing quality protection against damage from potential electrical power surges.
The 120HW is approved for all 20A circuit breakers and comes in a compact, high-impact ABS weather-proof box for indoor/outdoor installation. |
Features:
- Approved for 20A circuit breakers
- Diagnostic LED indicates ground presence, system power and SPD function
- Weatherproof enclosure
- Small footpront enables installation in a variety of locations
- Available for 120V systems
- Complies with ANSI/IEEE C62.41 and C62.45 Category B standards
- Ten year limited warranty
|
Technical Specifications:
- Agency Approvals: UL 1449, 3rd Edition, cUL
- IEEE Location Category: Category B
- Protector Type: SPD Type 2
- Protection Modes: L-G, L-N, N-G
- Response Time: <1ns
- Temperature Range: -40F to 185F (-40C to 85C)
- Maximum Humidity: 95 percent, non-condensing
- Operating Frequency: 0Hz to 400Hz
- Dimensions: 2.93" x 2.83" 1.68" (74.4mm x 71.9mm x 42.7mm)
- Connection: 3/4" diameter threaded fitting
- Weight: .5lb (227g)
- Housing: ABS
- Service Wiring: 2W+G, 120VAC
- Peak Surge Current: 19,500A
- MCOV: 130V
- UL 1449 3rd Ed. VPR: 700V L-N, L-G; 600V N-G
- Short Circuit Current Rating: 10,000A
- UL 1449 3rd Ed. I rating: 3,000A
|
UPC: 782980500243
Average rating: 5.0, based on
2 reviews
For more information about the Ditek DTK-120HW, please contact us.
|
|
|
 |
|
 |
|
