Wheelock ELSTWC Eluxa LED Fire Alarm Strobe White Ceiling
-
MPN: ELSTWC
-
JMAC ID: 202485255
The Cooper Wheelock ELSTWC is a white, ceiling-mounted LED fire alarm strobe from Eaton's Eluxa Series, designed to provide visual emergency notification in commercial and institutional buildings. Operating on a 24VDC nominal notification appliance circuit with a 16-33VDC regulated voltage range, the strobe offers six field-selectable candela settings of 15, 30, 75, 110, 150, and 177 cd. Its low-current LED technology, clear lens, FIRE lettering, and synchronization compatibility support code-compliant fire alarm notification systems.
Cooper Wheelock ELSTWC Eluxa 24V White Ceiling-Mount LED Fire Alarm Strobe
The Cooper Wheelock ELSTWC Eluxa LED Strobe provides visual fire alarm notification through a ceiling-mounted flashing light designed for indoor commercial fire protection systems. Its white housing, clear Lexan lens, and visible FIRE lettering identify the device as a fire alarm notification appliance. The six field-selectable candela settings of 15, 30, 75, 110, 150, and 177 cd allow installers to configure light intensity according to ceiling height, room dimensions, and applicable NFPA 72 requirements. The ELSTWC is a visual-only notification appliance without an integrated horn, making it suitable for installations requiring separate audible and visual signaling.
The ELSTWC operates on a 24VDC nominal notification appliance circuit (NAC) with a regulated operating range of 16-33VDC. Its LED light source draws a maximum UL/ULC-rated current of 22mA at 15 cd, 30mA at 30 cd, 60mA at 75 cd, 86mA at 110 cd, 125mA at 150 cd, and 185mA at 177 cd. These selectable current levels support notification circuit load calculations and power supply sizing. The strobe produces a minimum of one flash per second and meets the 20-millisecond maximum light pulse duration requirements referenced in NFPA 72. Compatible Wheelock DSM synchronization modules, PS power supplies, and SAFEPATH equipment coordinate flash timing across connected notification appliances.
The ELSTWC features a low-profile ceiling-mount housing measuring approximately 6.25 inches in diameter, with a white finish and concealed mounting hardware. Its included mounting plate uses a hinged installation mechanism that supports pre-wiring, electrical testing, and appliance attachment without holding the entire unit during termination. Tool-free slide switches allow candela adjustment, while IN/OUT screw terminals accommodate 12-18 AWG field wiring. The strobe mounts to compatible 4-inch square or octagonal electrical boxes and supports the optional Wheelock LSPKBB-C ceiling backbox. Pre-wire and pre-test functionality allows installers to identify wiring and ground faults before attaching the notification appliance.
The Cooper Wheelock ELSTWC is UL 1971 and UL 1638 listed for applicable visual signaling applications and complies with CAN/ULC-S526 requirements. Its operating temperature range is 32 F to 122 F (0 C to 50 C), restricting use to suitable indoor environments. The Eluxa Series supports synchronization with compatible Wheelock RSS and Exceder LED3 notification appliances, including installations containing both LED and xenon strobes within the same field of view. The ELSTWC also supports integration with compatible fire alarm control panels and notification power supplies approved for Wheelock synchronization. Its low-current LED design, selectable light output, and ceiling-mount configuration provide flexible visual notification for offices, schools, healthcare facilities, and other commercial fire alarm installations.
UPC: 786697009716
Also known as: WH-ELSTWC
Technical Specifications:
|
For more information about the Cooper Wheelock ELSTWC, please contact us.