Cooper Wheelock E50A24MCWALR
-
MPN: E50A24MCWALR
-
JMAC ID: 200275807
The Cooper Wheelock E50A24MCWALR is a red speaker strobe with an amber lens, a candela rating of 15/30/75/110cd, input voltage of 24 VDC, a wall mount and ALERT printed in white.
The Wheelock Series E50 Speaker Strobes feature high efficiency sound output, with dual voltage (25/70 VRMS) capability and field selectable taps from 1/8 to 2 watts. They are designed to provide a sleek, aesthetic appearance for emergency voice/alarm communications systems. All Series E50 models mount to standard 4 x 2-1/8 electrical boxes (with no extension ring required) and incorporate a speaker mounting plate for faster installation. The grille cover snaps on so no mounting screws are visible.
For more information about the Cooper Wheelock E50A24MCWALR, please contact us.
The Wheelock Series E50 Speaker Strobes feature high efficiency sound output, with dual voltage (25/70 VRMS) capability and field selectable taps from 1/8 to 2 watts. They are designed to provide a sleek, aesthetic appearance for emergency voice/alarm communications systems. All Series E50 models mount to standard 4 x 2-1/8 electrical boxes (with no extension ring required) and incorporate a speaker mounting plate for faster installation. The grille cover snaps on so no mounting screws are visible.
For more information about the Cooper Wheelock E50A24MCWALR, please contact us.
- Field selectable candela setting of 15/30/75/110cd
- Snap on grille cover with no visible mounting screws
- Mount to 4” square x 2-1/8” deep backbox with no extension ring required
- Synchronize with Wheelock DSM or Wheelock Power Supplies with built-in sync protocol
- “Regulated Voltage” of 16 to 33 volts using filtered DC or unfiltered VRMS input voltage
- 24 VDC strobes produce 1 flash per second with wide UL
- High efficiency design for maximum output at minimum wattage across a frequency range of 400 to 4000 HZ
- Field selectable taps for 25 or 70 VRMS operation from 1/8 watt up to 2 watts
- Fast installation with IN/OUT screw terminals using #12 to #18 AWG wires