Cooper Wheelock E5024MCCFR
-
MPN: E5024MCCFR
-
JMAC ID: 200275805
The Cooper Wheelock E5024MCCFR is a red speaker strobe with a candela rating of 15/30/75/110cd, input voltage of 24 VDC, ceiling mount and FIRE printed in white.
The Wheelock Series E50 Speaker Strobes feature high efficiency sound output, with dual voltage (25/70 VRMS) capability and field selectable taps from 1/8 to 2 watts. They are designed to provide a sleek, aesthetic appearance for emergency voice/alarm communications systems. All Series E50 models mount to standard 4 x 2-1/8 electrical boxes (with no extension ring required) and incorporate a speaker mounting plate for faster installation. The grille cover snaps on so no mounting screws are visible.
UPC: 786697102653
For more information about the Cooper Wheelock E5024MCCFR, please contact us.
The Wheelock Series E50 Speaker Strobes feature high efficiency sound output, with dual voltage (25/70 VRMS) capability and field selectable taps from 1/8 to 2 watts. They are designed to provide a sleek, aesthetic appearance for emergency voice/alarm communications systems. All Series E50 models mount to standard 4 x 2-1/8 electrical boxes (with no extension ring required) and incorporate a speaker mounting plate for faster installation. The grille cover snaps on so no mounting screws are visible.
UPC: 786697102653
For more information about the Cooper Wheelock E5024MCCFR, please contact us.
- Snap on grille cover with no visible mounting screws
- Field selectable candela setting of 15/30/75/110cd
- Field selectable taps for 25 or 70 VRMS operation from 1/8 watt up to 2 watts
- High efficiency design for maximum output at minimum wattage across a frequency range of 400 to 4000 HZ
- 24 VDC strobes produce 1 flash per second with wide UL
- “Regulated Voltage” of 16 to 33 volts using filtered DC or unfiltered VRMS input voltage
- Synchronize with Wheelock DSM or Wheelock Power Supplies with built-in sync protocol
- Mount to 4” square x 2-1/8” deep backbox with no extension ring required
- Fast installation with IN/OUT screw terminals using #12 to #18 AWG wires