516-812-0917
Help
Live Chat
ComNet FDX70EBM1 Universal Data Point to Point "B" End Transreceiver, Single Fiber, Multimode
-
MPN: FDX70EBM1
-
JMAC ID: 200225411
The ComNet FDX70 data transceivers provide point-to-point transmission of simplex or duplex EIA RS232/RS422/RS485 (2W/4W) data signals over one single mode or multimode optical fiber. The transceivers are transparent to data encoding allowing for broad-range compatibility.
Models within this series are available for use with multimode or single mode optical fiber. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Each transceiver incorporates a bi-color (Red/Green) indicating LED for monitoring proper system operation. Packaged in the exclusive ComNet ComFit housing, the FDX70 standard size units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.
UPC: 999999420420
Also known as: C4-FDX70EBM1, CCN-FDX70EBM1
For more information about the ComNet FDX70EBM1, please contact us.
Models within this series are available for use with multimode or single mode optical fiber. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Each transceiver incorporates a bi-color (Red/Green) indicating LED for monitoring proper system operation. Packaged in the exclusive ComNet ComFit housing, the FDX70 standard size units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.
UPC: 999999420420
Also known as: C4-FDX70EBM1, CCN-FDX70EBM1
For more information about the ComNet FDX70EBM1, please contact us.
- Robust design assures extremely high reliability in unconditioned out-of-plant/roadside environments
- Interchangeable between stand-alone or rack mount use – ComFit
- Hot-swappable rack modules
- Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
- Wide optical dynamic range: optical attenuators are never required
- Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events.
- Remote Fault Indication allows the user to determine when a fiber break or loss of prime operating power has occurred, or a transceiver in the field has failed
- NTCIP compatible
- May be DIN-rail mounted with the ComNet model DINBKT1 or DINBKT4 adaptors (sold separately)
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/lowline voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
- Meets EIA RS232C/D and RS422/RS485 (2 or 4-wire) specifications
- "B" end
- Multimode
- Lifetime Warranty
Other products from ComNet
Customer Reviews
(No reviews yet)
Write a Review
