ComNet CLFE1EOU 1 Port Ethernet-Over-UTP Extender, Local/Remote Configurable, 1 Channel, Small Size

  • MPN: CLFE1EOU
  • JMAC ID: 200469856
$388.48
JMAC_ID:
200469856
df_manual_boost:
1.75
The ComNet CopperLine Ethernet over copper line supports up to sixteen channels of 10/100Mbps Ethernet with Pass-through PoE over twisted pair cable (CAT-5, UTP), or over coaxial cable. The single channel units may be powered by a PoE switch or the included power supply. Four, eight, and sixteen channel units operate from local power. These units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. DIP switches are provided for user-selection of local or remote, 10 or 100Mbps, and 1 pair or 4 pair (UTP) settings.

UPC: 845770010657
Also known as: CCN-CLFE1EOU

Technical Specifications:
  • Length: 3.3"
  • Height: 1.1"
  • Width: 2.5"
  • Maximum Extended Range: 5000 ft
  • Product Line: CopperLine
  • Product Series: CLFE
  • Product Type: Network Extender
  • Maximum Data Transfer Rate: 12.50 MB/s
  • Maximum Data Transfer Rate (Bps): 13107200
  • Width (mm): 63.5
  • Network (RJ-45): Yes
  • Number of Network (RJ-45) Ports: 1
  • Length (mm): 83.82
  • Height (mm): 27.94
  • Maximum Extended Range (mm): 1524000


For more information about the ComNet CLFE1EOU, please contact us.
  • Extends Ethernet up to 3,000 feet (914 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over UTP cable
  • Lifetime warranty
  • LED status indicators confirm operating status
  • Designed and manufactured in the USA
  • Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and CALTRANS Traffic Signal Control Equipment Specifications.
  • Complies with all major IEEE standards and RFC network protocols for UDP, TCP/IP, HTTP/HTTPs
  • User-selectable data rate for maximum bandwidth and transmission distance utilization
  • Type tested to RFC-2544 TCP/IP network bandwidth packet transmission standards
  • usable distance
  • download with virtually zero packet loss over the total
  • Symmetric Bandwidth provides consistent upload and
  • Supports Multicast, Unicast and Jumbo Frame
  • Full 10/100 Mbps Bandwidth
  • standard for Power over Ethernet
  • Extended Pass-through PoE meets the IEEE 802.3af
  • 1 port
  • UTP cable
  • Local/remote configurable position
  • 1 channel
  • 1 RU 19" rack mount
  • Transmits individual Ethernet data channels with Pass-through PoE over standard UTP or Coaxial cable
  • Extended temperature operation from -40°C to +75°C
Live Chat