Camden CX-EPD1289L Grade 1 Preload Rim Electric Strike

The Camden CX-EPD1289L is an ANSI/BHMA Grade 1 surface-mount electric rim strike designed for access-controlled doors equipped with rim exit devices and 3/4-inch Pullman latches. Its patented preload-release mechanism operates under up to 15 pounds of preload pressure, reducing release failures caused by door misalignment or pressure against the keeper. The stainless steel strike supports 12/24V AC/DC operation, field-selectable fail-safe or fail-secure modes, and integrated latch monitoring. It provides 1,500 pounds of UL-verified static strength and a three-hour fire rating in fail-secure mode.

Camden CX-EPD1289L Grade 1 Surface-Mount Electric Rim Strike with Preload

The Camden CX-EPD1289L is a heavy-duty stainless steel electric rim strike that provides controlled door release for compatible rim exit devices with 3/4-inch Pullman latches. Its patented preload-release mechanism operates under up to 15 pounds of pressure against the strike keeper, addressing binding caused by door misalignment, building air pressure, or mechanical loading. The surface-mounted design eliminates the need to cut a recessed strike pocket into the door frame, while the non-handed configuration accommodates left-hand and right-hand doors. An integrated, removable latch monitoring switch communicates latch status to compatible access control and door monitoring systems.

The CX-EPD1289L supports field-selectable 12V or 24V AC/DC power and fail-safe or fail-secure operation, with a current draw of 560mA at 12VDC or 280mA at 24VDC. AC operation produces an audible buzz, while DC operation provides quiet release. Its independently operating latches accommodate compatible rim exit hardware, and the integrated SPDT latch monitor is rated for 100mA at 24VDC with a resistive load. The strike provides 1,500 pounds of UL-verified static strength, 70 ft-lbs. of dynamic strength, and 500,000 UL-verified operating cycles, with 1,000,000 cycles completed during manufacturer endurance testing.

The CX-EPD1289L features a no-cut surface-mount design with horizontal adjustment to simplify alignment between the strike keeper and exit device latch. Its low-profile housing measures approximately 9-3/16 inches high, 1-15/16 inches wide, and 3/4 inch deep. A metal mounting jig is included for positioning the strike during installation, while an optional CX-EPD1289-SPC 1/8-inch spacer plate accommodates installations requiring additional clearance. The strike supports compatible Pullman-latch rim exit devices from manufacturers including Von Duprin, HES, and other commercial door hardware brands, subject to model-specific compatibility. The standard CX-EPD1289L features a stainless steel finish, while the CX-EPD1289L-BK provides an all-black alternative.

The Camden CX-EPD1289L is ANSI/BHMA A156.31 Grade 1 certified and carries UL 1034 and UL 294 security listings for commercial access control applications. Its UL 10C and CAN4-S104 three-hour fire rating applies only when configured for fail-secure operation, making operating mode selection essential for fire-rated openings. The strike also carries windstorm resistance certifications, including ANSI/SDI A250.13, for applicable door assemblies. Its stainless steel construction, preload-release capability, and field-selectable electrical operation support commercial entrances, institutional doors, and high-traffic access-controlled openings. The CX-EPD1289L includes a five-year manufacturer warranty and must be installed with compatible exit hardware according to Camden's instructions and applicable life safety requirements.