Camden TX-9 Wall Switch Transmitter

  • MPN: CM-TX-9
  • JMAC ID: 200047363
$45.25
In Stock
  • Expedited Shipping Available Expedited Shipping Available
  • Need it Tomorrow?
    Need it Tomorrow?
    Select the NEED IT FAST shipping option at checkout and a member of our team will contact you promptly with any available Expedited Shipping options once we receive your order.
JMAC_ID:
200047363
df_manual_boost:
2.20
Please Note: In order to keep our prices low, we have a minimum order requirement of $99

The Camden CM-TX-9 is a single-channel wireless wall switch transmitter from the Lazerpoint RF Series, designed to activate automatic door operators through compatible wireless receivers. Operating on 902-928 MHz spread-spectrum radio frequencies, it provides a wireless transmission range exceeding 500 feet in open areas and supports one million unique 20-bit codes. The transmitter uses two AAA alkaline batteries rated for at least 500,000 operations and features audible low-battery, battery-level, and stuck-switch diagnostics. Its compact design mounts behind push plates, wall switches, and activation buttons without requiring control wiring to the receiver.

Camden CM-TX-9 Lazerpoint RF Wireless Wall Switch Transmitter

The Camden CM-TX-9 Lazerpoint RF Transmitter converts a normally open momentary switch into a wireless activation device for compatible automatic door operators. When a connected push plate or activation button is pressed, the transmitter sends a radio signal to a paired Lazerpoint receiver, which activates the connected door operator through its relay output. The single-channel transmitter operates within the 902-928 MHz ISM frequency band using spread-spectrum technology to support reliable communication. Its compact construction fits behind wall-mounted push plates, activation switches, and pedestal-mounted controls, eliminating the need to run activation wiring between the switch and door operator.

The CM-TX-9 operates on two replaceable AAA alkaline batteries, with optional AAA lithium batteries recommended for low-temperature applications. The transmitter provides more than 500 feet (152 meters) of wireless range in unobstructed areas and supports one million unique 20-bit transmission codes. Its specified current draw is approximately 2mA, while battery capacity supports a minimum of 500,000 activation cycles under manufacturer-defined conditions. An integrated piezoelectric sounder provides audible confirmation of battery status through Camden's Battery Gauge function and alerts users to low-battery and stuck-switch conditions. The transmitter also captures brief switch activations to communicate momentary button presses to the receiver.

The Camden CM-TX-9 measures 2-1/4 inches long, 5/8 inch wide, and 3/8 inch high, allowing installation inside compact wall boxes, door jamb boxes, posts, and compatible switch enclosures. The transmitter includes two 10-inch connection leads with 1/4-inch quick-disconnect terminals for attachment to a normally open momentary dry-contact switch. Double-sided foam tape secures the circuit board and battery holder inside the enclosure without requiring a separate mounting bracket. The electronics feature a conformal protective coating, although installation must prevent direct water exposure. Camden specifies an operating temperature range of 32 F to 122 F (0 C to 50 C) with alkaline batteries, extendable to -40 F (-40 C) at the lower limit when suitable lithium batteries are used.

The CM-TX-9 integrates with Camden Lazerpoint CM-RX-90, CM-RX-91, and CM-RX-92 wireless receivers for automatic door activation in commercial entrances, healthcare facilities, educational buildings, and accessibility applications. Compatible receivers accommodate up to 40 learned transmitters, allowing multiple push plates or activation switches to control a single operator. The CM-RX-91 provides one relay output, while the CM-RX-92 offers two independently configurable relay outputs for applications requiring additional door control functions. Transmitter enrollment uses the receiver's Push-and-Learn programming procedure, eliminating manual code-switch configuration. The CM-TX-9 is a battery-powered transmitter only and requires a compatible receiver, activation switch, and door operator for a complete wireless activation system. Camden backs the Lazerpoint RF Series with a three-year limited manufacturer warranty, excluding batteries.



UPC: 670454161987
Also known as: CM-TX9, CMTX9

Technical Specifications:
  • Temp Range: -40°F to 185°F (-40°C to +85°C)
  • Current Draw: 2 mA
  • Contact Rating: 3 Amps @ 30VDC
  • Power/Voltage: (2) AAA alkaline batteries (supplied)
  • Codes: 1 Million Unique (20 Bit) Codes
  • Wireless Frequency: 905.25 / 915.25 / 925.25 MHz. Spread Spectrum
  • Battery Life: 500,000 cycles


For more information about the Camden Door Controls CM-TX-9, please contact us.
  • Ultra compact switch transmitter fits anywhere, including jamb box

2 Reviews

  • 5
    CAMDEN-TX-9

    Posted by 163008 on Nov 7th 2020

  • 5
    CAMDEN-TX-9

    Posted by 54456 on Apr 18th 2013

Live Chat