Bosch D263THS Photoelectric Smoke/Heat Detector with Sounder, 135F

The Bosch D263THS two-wire photoelectric smoke detector uses an infrared (IR) LED light source and a silicon photodiode to measure light in a chamber. A fine screen covers the chamber to deter insects and to reduce dust accumulation and nuisance alarms.

During a fire, smoke particles reflect light onto the photodiode. When the photodiode measurements exceed the alarm threshold, the D263TH signals an alarm condition. After the alarm condition clears, interrupt power at the control panel to reset the detector.

The D263THS is equipped with a 135F (57C) heat sensor and sounder.

UPC: 782695023150
Also known as: DS-D263THS

Technical Specifications: Voltage (stand-by): 8.5 VDC to 33 VDC RMS Ripple (maximum): 25% of DC input Power-up Time: 22 sec maximum Current Draw (trouble): 0.1 mA maximum Current Draw (start-up): 0.12 mA Current Draw (standby): 0.080 mA at 12 V, 0.1 mA maximum Current Draw (alarm): Determined by control panel Auxiliary Relay Contacts: Form C 1 A, 120 VAC/30 VDC at 1 A, 30 W maximum Material: High impact, fire retardant ABS plastic Dimensions (Diameter x H): 5 in. x 2 in. (12.7 cm x 5.1 cm)

For more information about the Bosch Security D263THS, please contact us.