BEA 10TD900PB 900MHz Wireless Push Plate Transmitter
-
MPN: 10TD900PB
-
JMAC ID: 200524377
The BEA 10TD900PB is a 900 MHz hardwired wireless push-button transmitter designed for automatic pedestrian door activation systems. Operating within the 908-918 MHz frequency-hopping range, the transmitter converts a wired push plate activation into a wireless signal for compatible BEA receivers. Featuring two AAA battery operation, flag-style push plate connectors, and a compact 1.75 x 1.00 x 0.30-inch housing, the 10TD900PB installs inside compatible push plate mounting boxes. It supports wireless door activation, accessible entrance controls, and vestibule sequencing when paired with compatible BEA 10RD900 or BR2-900 receiver equipment.
BEA 10TD900PB 900 MHz Hardwired Push Plate Wireless Transmitter
The BEA 10TD900PB Hardwired Push Button Transmitter provides wireless activation signaling for automatic pedestrian doors equipped with compatible mechanical push plates. Part of the BEA 900 MHz Wireless Family, the transmitter connects to the normally open and common contacts of a push plate and sends an activation signal to an enrolled receiver when the switch is pressed. This arrangement allows installers to integrate wireless communication into an otherwise hardwired activation station, reducing the need for control wiring between the push plate and the automatic door operator. The transmitter is designed for accessible entrances, commercial buildings, healthcare facilities, educational properties, and vestibule door systems requiring remotely located activation controls.
The 10TD900PB operates within a 908-918 MHz digital frequency-hopping radio band, providing wireless communication with compatible BEA receiver modules. Its compact circuit board measures 1.75 inches wide, 1.00 inch deep, and 0.30 inch high, allowing installation inside supported push plate enclosures. The transmitter is powered by two AAA batteries providing 3 VDC nominal power and uses flag-style connectors for connection to the activation switch. Manufacturer documentation identifies approximately 30 mA transmitter current consumption and an operating temperature range of 14 F to 131 F (-10 C to 55 C). An integrated red LED indicates transmission and flashes to identify a low-battery condition, supporting routine operation and battery maintenance.
Designed for automatic swing doors, sliding doors, accessible pedestrian entrances, and coordinated vestibule applications, the BEA 10TD900PB integrates with compatible 10RD900 wireless receivers and 10BR2-900 logic modules. A standard 10RD900 receiver supports enrollment of up to 75 programmable transmitters, allowing multiple activation stations to communicate with a shared receiving module. Receiver-based programming provides delayed or immediate activation, pulse or toggle operation, and extended relay hold functionality according to system requirements. These capabilities support coordinated entrance sequencing and push plate activation without requiring a dedicated wired connection between each activation station and the receiver. The transmitter is also used in compatible BEA 900 MHz wireless push plate packages.
The BEA 10TD900PB installs inside a compatible push plate mounting enclosure, with its activation leads connected to the switch's normally open (N.O.) and common (COM) terminals. After installation, technicians enroll the transmitter using the receiver's learn function and verify signal strength and door activation. Compatible receivers provide a tri-color signal strength indicator that displays green for a strong connection, yellow for medium signal strength, and red for a weak connection. The transmitter's two replaceable AAA batteries allow continued service without replacing the complete radio assembly. The 10TD900PB is a transmitter-only accessory; the push plate, wireless receiver, and automatic door operator are separate components. Installation and final door safety testing must follow BEA instructions and applicable automatic pedestrian door safety standards.
UPC: 900001446167
Technical Specifications:
|
For more information about the BEA 10TD900PB, please contact us.
- 900 MHz push button transmitter
1 Review
-
BEA-10TD900PB