American Fibertek RT-926C Two Channel Digital Video Rack Card Transmitter, Bi-Directional Multi-Protocol Data, Contact Closure Channels, Multimode

The American Fibertek 926C Series transmits two channels of high-quality 10 bit digitized video, one channel of bi-directional multiprotocol data, and one bi-directional contact closure channel on one multimode optical fiber using WDM technology. Designed to be completely transparent to all camera and monitor manufacturers, this system requires no field adjustments at installation or additional maintenance thereafter. Diagnostic indicators provide a quick visual indication of system status. The Afinety intelligent remote monitoring system is available on this product, please consult factory. Equipment may be ordered as stand alone modules or rack cards, these are mounted in the American Fibertek Card Cages: SR-20/2 or SR-20R/1.


Also known as: RT926C

Technical Specifications: Size: 6-1/2" x 5" x 2" Power Supply: SFI SR-20/2 Temperature (Operating): -40°C to +75°C, non-condensing Connector: ST Distance: 4 km Loss Budget (62.5/125µ): 12 dB Wavelength: 1310/1550 nm Connector: Terminal Block Max Current: 0.5A Max Voltage: 100 VDC or Peak AC Response Time: 2 ms Output: Dry Contact Input: Switch Closure to Ground Connector: 5 Pin Screw Terminals Data Rate: DC to 115 Kbs Data Format: Asynchronous, Serial Interface: 485(2 or 4 Wire)/RS422/RS232 Connector: BNC SNR (Unified Weighted): 65 dB Differential Phase: 0.7° Differential Gain: 2 % Bandwidth: 7 MHz I/0 Impedance: 75 Ohms I/0 Level: 1 Vp-p (±3 dB)

For more information about the American Fibertek RT-926C, please contact us.