American Fibertek RR-915C-SL Single Channel Digital Video Rack Card Receiver, One Bi-Directional Multi-Protocol Data Channel, One Bi-Directional Contact Closure, Single Mode

The American Fibertek RR-915C-SL is the rack card receiver component of the 915C-SL series which transmits one channel of high-quality 10 bit digitized video plus one channel of multiprotocol data and a contact closure on one multimode optical fiber using WDM technology. Designed to be completely transparent to all camera and monitor manufacturers, this system requires no field adjustments at installation or additional maintenance thereafter. Diagnostic indicators provide a quick visual indication of system status. The Afinety intelligent remote monitoring system is available on this product, please consult the factory. Rack cards can be mounted in the American Fibertek Card Cages SR-20/2.


Also known as: RR915CSL

Technical Specifications: Size: 6-1/2” x 5" x 1” Power Supply: AFI SR-20/2 Temperature (Operating): -40°C to +75°C, non-condensing Connector: FC/PC Loss Budget (62.5/125µ): 21 dB Wavelength: 1310/1550nm Connector: Terminal Block Max Current: 0.5A Max Voltage: 100 VDC or Peak AC Response Time: 2 ms Output: Dry Contact Input: Switch Closure to Ground Connector: 5 pin screw terminal Data Rate: DC to 115 Kbs Data Format: Asynchronous, Serial Data Protocol Interface: 485 (2 or 4 Wire), RS422, RS232 Connector: BNC SNR (Unified Weighted): 65 dB Differential Phase: 0.7° Differential Gain: 2 % Bandwidth: 7 MHz I/0 Impedance: 75 Ohms I/0 Level: 1 Vp-p (±3 dB)

For more information about the American Fibertek RR-915C-SL, please contact us.