American Fibertek RRM-1400 Single Fiber Bi-Directional Rack Card Receiver, Multimode

The RRM-1400 operates as half of a transmitter / receiver pair for the transmission of baseband NTSC, PAL, RS170, or RS343 video signals with bi-directional RS422 data. It is designed to operate with the MTM-1400 or RTM-1400 video transmitter over a single multimode fiber optic cable.

The RRM-1400 converts an optical fiber input into a single video output and a single RS422 output using a 1300 nm wavelength detector. The RRM-1400 also converts an electrical RS422 input signal into an optical RS422 output returning on the same fiber using an 850 nm wavelength source. The 1400 Series product is designed to operate over an optical loss budget range of 0 to 12 dB. The RRM-1400 operates on 50 um or 62.5 um multimode fiber.

This unit is designed for rack mounting in any of the three American Fibertek subracks available. The subrack model numbers are SR-20/1, SR-20R/1, and SR-20/2. Slide in rack mounting and LED indicator provide for easy installation and monitoring of video and power. The RRM-1400 is designed for rack mounting only. For a modular version please see the MRM-1400.

UPC: 809100008660
Also known as: AZ-RRM1400, AFI-RRM1400, RRM1400

Technical Specifications: Size: 6-1/2” x 1” x 5” Power Consumption: 3 Watts Power Supply: SR-20D/2 Temperature (Operating): -40°C to +74°C, non-condensing Connector: ST Loss Budget (62.5/125µ): 12 dB Wavelength: 850/1300 nm Data Connector: 5 pin screw terminal Data Rate: Up to 19.2 Kbps Connector: BNC SNR: 60 dB Differential Phase: 5° Differential Gain: 5% Bandwidth: 8 MHz I/O Impedance: 75 Ohms I/O Level: 1 Vpp

For more information about the American Fibertek RRM-1400, please contact us.