American Fibertek N-111 Network I/O Module

The American Fibertek N-111 Network I/O module is your solution for transmitting, real world alarm contact, auxiliary output and data across networks. With its easy to use web interface, an alarm contact generated at one location can trigger auxiliary outputs any where on your network. For the first time, physical contacts no longer have any distance limitations.

With its built in user programmable data port for RS 232 or RS 485, Net I/O can be used to carry information from Cash Registers, Point of Sale, Access Control and Alarm Panels to and from remote locations.

Also included is the afi Watchdog Ping system that can monitor an IP device and detect if it fails to respond over the network. The IP devices power supply connection can be looped thru N-111s auxiliary relay output. Upon loss of a successful ping response, the auxiliary contact may be cycled (which cycles power to the IP device) to reset a locked up network device.

UPC: 809100041513
Also known as: AZ-N111, AFI-N111, N111

Technical Specifications: Max Voltage: 100 V Relay Type: Form C Alarm In (Software selectable): Normally Open or Normally Closed Unsupervised or Supervised Serial Port Connector: Male DB9 Serial Port Data: RS232, RS422, RS485 Connector: RJ45 Size: 4-1/4” x 4-1/4” x 1-1/8” Humidity: 5 % to 95 % Temperature: -40 °C to 75°C AFI Part #: PS-12D Connector: 2 Pin Terminal Block Current: < 100 mA Voltage: 12 VDC PoE: Class 2 Max Current: 0.5 A Data Rate: Auto negotiated, 10/100 Mb/s

For more information about the American Fibertek N-111, please contact us.