American Fibertek MX2-MM-FX-ST Fast Ethernet Fiber OpticTransceiver Module, FX, ST Connectors, Multimode

American Fibertek's V'nes MX Media Convertor series enable network managers to connect 10/100 Fast Ethernet or 1000 Mbps Gig E twisted pair to fiber optic cabling for wide bandwidth cost effective short or long distance transmission. Multiple port design reduces installation and cable allowing for multiple inputs to run on a single path. The Media Convertor MX series provides optional single fiber WDM technology combining dual fiber cable into single cable for greater cost savings. Front panel LEDs provide easy status checking along with Link Fault Pass Through and MDI/MDI-X for easy installation. When combined with Commander series switch products, the MX provides easy, and cost effective solutions to convert any number of ports from twisted pair to fiber. The MX product line is available as standard alone modules that can also be directly inserted into a modular rack and SR-20 compatible rack modular cards.

UPC: 809100038261
Also known as: AZ-MX2MMFXST, MX2MMFXST

Technical Specifications: Data Port: 2 x 10/100Mbps RJ45, 1 x 10/100Mbps Dual Fiber SC auto configuration, auto negotiation Standards: IEEE: 802.3 802.3u Certifications: RoHS, FCC: Part 15 Class A CE: EN55022 Class A, EN55024 Humidity: 0%~95%RH, non-condensing Temperature Operating: -20°C ~ +55°C (-4F ~+131F) Dimensions: 102mm (4”) X 122mm (4.8”)X 26mm (1”) (DxWxH) Power: DC 5V, 0.5A Max Weight: 0.3kg, (0.7pds) LED Actions: FX Link-red , blinking when data active, Link/Act-red, blinking when data active SPD-10Mbps/not lit, 100Mbps/green Power- red Forward and Filter Rate (64 Bytes): 14,881pps(10Base-T), 148,810pps(100Base-T) MAC Table: 2K Maximum distance: 100 m (10Base-T) UTP, Cat. 3/4/5 cable,RJ-45 connector), 2 Km (100Base-FX), Multi-mode fiber, SC connecter), 20 Km(100Base-FX), Single mode mode fiber, SC connecter) Fiber cable: 50/125, 62.5/125(multimode) 9/125 (single-mode) UTP: Cat. 5 UTP Cable Ethernet data rate: Full Duplex: 20Mbps or 200Mbps, Half Duplex: 10Mbps or 100Mbps Wavelength: 1310nm Switching mechanism: Store & forward switching mechanism Fiber/optical connector: Dual fiber ST

For more information about the American Fibertek MX2-MM-FX-ST, please contact us.