American Fibertek MTX-986C-SL Video/Data/CC Transmitter and Data/CC Receiver, Eight Channel Digital Video, Bi-Directional Multi-Protocol Data, Contact Closure, Single Mode

The American Fibertek MTX-986C-SL is a video/data/CC transmitter and data/CC receiver component of the 986C-SL series which transmits 8 channels of high-quality 10 bit digitized video, one channel of bi-directional multiprotocol data and a bi-directional contact closure on one single mode optical fiber using WDM technology. Designed to be completely transparent to all camera and monitor manufacturers, this system requires no field adjustments at installation or additional maintenance thereafter. Diagnostic indicators provide a quick visual indication of system status. Equipment consists of a 1 RU housing which contains the Video, Data, Contact Closure and the WDM passive optics.


Also known as: AZ-MTX986CSL, MTX986CSL

Technical Specifications: Loss Budget (62.5/125µ): 15 dB Wavelength: 1310/1550nm Connector: Terminal Block Max Current: 0.5A Max Voltage: 100 VDC or Peak AC Response Time: 2 mS Size: 1RU 1.75” High x 19” Wide x 12” Deep Power Supply: Universal Power Input 100 to 240 VAC, 50 to 60 Hz, 55 W Operating Temp: -40°C to +75°C Connector: FC/PC Output: Dry Contact Input: Switch Closure to Ground Connector: 5 Pin Screw Terminal Data Rate: DC to 115 Kbs (NRZ) Data Format: Asynchronous, Serial Interface: Selectable Multi-protocol Choice of: RS485 (2 or 4 wire), RS422, RS232, Manchester Number of Channels: 1 (Full Duplex) Connector: BNC SNR (Unified Weighted): >65 dB Differential Phase: 0.7° Differential Gain: < 2% Bandwidth: 7 MHz I/0 Impedance: 75 Ohms I/0 Level: 1 Vp-p (±3 dB)

For more information about the American Fibertek MTX-986C-SL, please contact us.