American Fibertek MR-91-15G SD/HD-SDI Serial Digital Video Interface, Multimode, Module Receiver

The American Fibertek Series 91-1.5G Series transmits one channel of non-compressed high definition HD-SDI or SD-SDI signals on one singlemode or multimode optical fiber. The Series 91-1.5G is capable of transmitting up to 2 km on 62um multimode fiber and up to 20km on singlemode fiber while maintaining excellent video quality. Diagnostic LED indicators provide status on the SDI signal, optical power, and DC power to unit.

Designed to be completely transparent to all HD-SDI or SD-SDI compatible camera, DVR, and monitor manufacturers, this system requires no field adjustments at installation or additional maintenance thereafter. Compatible with NTSC; RS-170A & RS-343A and PAL.

UPC: 809100049229
Also known as: AZ-MR9115G, MR9115G

Technical Specifications: Size: (WxHxL): 1.5” x 1.0” x 3.75” Power Connector: 2 pin terminal block Power Supply: 12VDC @ 150mA MTBF: > 100,000 hours Relative Humidity (non-condensing): 0 to 95% Storage Temperature: -40°C to +85°C Operating Temperature: -40°C to +75°C Connector: ST Transmission Distance: 2 km - limited by fiber Loss Budget (50/125µ): 5 dB; (62.5/125µ): 8 dB Wavelength: 1310 nm SDI Connector: BNC Transmission Distance: 100 m on Belden 1694A Max Resolution: 720P 50/60 1080i 50/60 1080P 25/30 Standards: SMPTE 259M, 292M Resolutions: 720p and 1080p Data Rate: 1.485Gbs max Format: SD-SDI, HD-SDI Input/Output Level: 800 mVpp Input/Output Impedance: 75 ohm

For more information about the American Fibertek MR-91-1.5G, please contact us.