American Fibertek ECT-1-POE Ethernet Over Coax Transmitter with PoE+ and PoC

The American Fibertek Series EC-1-PoE solution allows for the utilization of existing coax cable infrastructure to transmit bi-directional data from IP cameras and other network devices. The AFI Series EC-1-PoE receiver power supply provides Power Over the Coax (PoC) to power the EC-1- PoE transmitter which also provides PoE to the IP camera. The PoE power supply is ordered separately. ]

The AFI Series EC-1-PoE link is a system containing a transmitter and a receiver that requires very little installation and no set up or configuration. The system can quickly turn any ordinary RG59 coax cable into an IP network communication path.

The units packaging are constructed of black anodized aluminum with corrosion resistant finish. LED indicators show the status and activity of network communications.

The AFI Series EC-1-PoE system is designed to be completely transparent to the network. Simply connect your network devices to the networking ports on the transmitter and receiver and, using with existing coaxial cable infrastructure, the system begins communicating.

Rack mount chassis for mounting multiple modules is available.


Also known as: AZ-ECT1POE, ECT1POE

Technical Specifications: Size: 4.6” x 3.2” x 1.2” (114 x 82 x 31 mm) MTBF: >100,000 hr Humidity: 5 % to 95 % Storage Temp: -40 °C to 85 °C Operating Temp: -10°C to 60°C Power Supply: PS-4830 (ordered separately) - 48VDC / 30W Connector: 2 Pin Terminal Block Power: without PoE/PoC load) - 8 W Power, with PoE/PoC load - 60 W Voltage: 48 VDC Upstream Data Rate: 10 Mbps Downstream Data Rate: 40 Mbps Distance(RG-59/U): 3280ft/ 1km) Connector: BNC Impedance: 75Ω Max Distance (Cat5): 328ft (100 m) Cable Type: Cat5 or above Connector: RJ45 PoE: 802.3af (15.4 Watts), 802.3at (30 Watts) Speed: 10/100 Base-TX

For more information about the American Fibertek ECT-1-POE+, please contact us.