American Fibertek ECR-8-POE Ethernet Over Coax 8 Port Receiver, PoE+, PoC

The American Fibertek Series ECR-8-PoE+ solution allows for the utilization of existing coax cable infrastructure to support bi-directional data from 8 ECT-1-P transmitters and IP cameras or other network devices. The AFI Series ECR-8-PoE+ receiver power supply provides Power Over the Coax (PoC) to power to 8 EC-1-PoE+ transmitters which also provides PoE+ to the IP cameras. The PoE power supply is ordered separately.

The AFI Series ECR-8-PoE+ link is a system containing a transmitter and a receiver that requires very little installation and no set up or configuration. The system can quickly turn any ordinary RG59/U coax cable into an IP network communication path.

The units packaging are constructed of black anodized aluminum with corrosion resistant finish. LED indicators show the status and activity of network communications.

The AFI Series ECR-8-PoE+ system is designed to be completely transparent to the network. Simply connect your network devices to the networking ports on the transmitter and receiver and, using with existing coaxial cable infrastructure, the system begins communicating.


Also known as: AZ-ECR8POE, ECR8POE

Technical Specifications: Size: 19” x 11.8” x 1.7” (483 x 300 x 44 mm) MTBF: >100,000 hr Humidity: 5 % to 95 % Storage Temp: -40°C to 85°C Operating Temp: 0°C to 50°C Connector: Line Cord Power (with PoE/PoC load): 500max W Power (without PoE/PoC load): 16 W PoC/PoE Voltage: 48 VDC Input Voltage: 100-240VAC Upstream Data Rate: 10 Mbps Downstream Data Rate: 40 Mbps Distance(RG-59/U): 2625ft/(800m) Connector: 8 BNC Impedance: 75Ω Max Distance (Cat5): 328ft (100 m) Cable Type: Cat5 or above Connector: RJ45 PoE: 802.3af (15.4 Watts), 802.3at (30 Watts) Speed: 10/100/1000Base-T

For more information about the American Fibertek ECR-8-POE+, please contact us.