Altronix AL1024ULXB2 24VDC 10A Power Supply/Charger Board

  • MPN: AL1024ULXB2
  • JMAC ID: 200220767
$232.42
In Stock
  • Expedited Shipping Available Expedited Shipping Available
  • Need it Tomorrow?
    Need it Tomorrow?
    Select the NEED IT FAST shipping option at checkout and a member of our team will contact you promptly with any available Expedited Shipping options once we receive your order.
JMAC_ID:
200220767
df_manual_boost:
1.75

The Altronix AL1024ULXB2 is a UL Listed sub-assembly power supply/charger board designed to deliver regulated 24VDC power for fire alarm, access control, and burglar alarm systems. Converting 115VAC, 60Hz input into a single fused 24VDC non-power-limited output, it provides 10A for UL 294 access control applications or 8A continuous with 10A during alarm for UL 1481 fire alarm applications. The board features automatic battery backup switchover, sealed lead-acid battery charging, Form-C AC failure and battery supervision contacts, and short-circuit and thermal overload protection.

Altronix AL1024ULXB2 24VDC 10A Power Supply and Battery Charger Board

The Altronix AL1024ULXB2 Power Supply/Charger is a high-current, UL Listed sub-assembly designed to provide dependable 24VDC power for commercial fire alarm, intrusion detection, and electronic access control systems. Manufactured by Altronix Corporation, the AL1024ULXB2 converts 115VAC, 60Hz input power into a single filtered, electronically regulated 24VDC output for compatible security and life-safety equipment. The board provides 24VDC at 10A for UL 294 access control applications and supports 8A continuous operation with up to 10A during alarm conditions for UL 1481 fire protective signaling applications. Its integrated battery charging circuitry, supervisory relay outputs, and electrical protection features make it suitable for maintaining power to security controllers, electromagnetic locks, electric strikes, alarm equipment, and other compatible 24VDC devices. The AL1024ULXB2 is supplied as an open-frame power supply board without an enclosure or backup batteries, allowing integration into appropriately listed equipment assemblies and compatible Altronix power distribution systems.

The AL1024ULXB2 operates from a 115VAC, 60Hz input rated at 4.2A maximum and incorporates a 5A/250V input fuse for primary circuit protection. Its regulated DC output features a maximum ripple of 250 mV peak-to-peak, helping maintain stable electrical power for compatible electronic security equipment. Built-in short-circuit and thermal overload protection protects the power supply against abnormal electrical conditions, while dedicated LED indicators identify the presence of AC input power and an energized DC output. The unit provides a single fused, non-power-limited 24VDC output rather than multiple individually controlled or power-limited distribution circuits. Applications requiring separately fused, individually controlled, or Class 2 power-limited outputs require appropriate listed downstream distribution or control equipment. The power supply's fixed 24VDC configuration also distinguishes it from selectable 12/24VDC Altronix models, eliminating the need for field voltage selection.

The AL1024ULXB2 incorporates a built-in battery charger designed for compatible sealed lead-acid or gel-type standby batteries. Its charging circuit provides a maximum charge current of 3.6A and includes a 15A/32V battery fuse for battery circuit protection. When primary AC power is interrupted, the power supply automatically transfers to the connected standby batteries without an interruption caused by switching delay, supporting continued operation of connected security and fire alarm equipment within the battery system's available capacity. Independent Form-C dry-contact supervisory outputs monitor AC power failure, low battery conditions, and battery presence, allowing compatible alarm panels and supervisory equipment to identify power supply abnormalities. The battery charging and supervision functions help support standby power requirements for access control, burglary protection, and fire alarm installations when batteries are appropriately selected and sized. Backup batteries are sold separately, and the installation must provide suitable battery capacity, wiring, and enclosure space according to system load calculations and applicable installation requirements.

Designed for integration into listed electrical enclosures and power distribution assemblies, the Altronix AL1024ULXB2 measures approximately 8.3 inches long by 4.5 inches wide, with an open-frame circuit board construction suitable for equipment mounting. The board weighs approximately 1.15 pounds (0.52 kg) and operates in ambient temperatures from 32 F to 120 F (0 C to 49 C), with a specified storage temperature range of -4 F to 158 F (-20 C to 70 C). Relative humidity is rated at approximately 85% 5%, and heat dissipation is approximately 123 BTU per hour. The board is intended for indoor installation in a properly rated enclosure that maintains electrical separation between AC input wiring, non-power-limited DC output circuits, battery connections, and power-limited supervisory wiring. Altronix identifies the AL1024ULXB2 as suitable for integration into compatible Trove1, Trove2, and Maximal Series power and access integration systems, subject to enclosure configuration, mounting provisions, and equipment listing requirements.

The Altronix AL1024ULXB2 carries manufacturer-documented listings for UL 294 Access Control System Units, UL 603 Burglar Alarm Power Supplies, and UL 1481 Power Supplies for Fire Protective Signaling Systems, along with cUL certification to CSA C22.2 No. 205-M1983 for Signal Equipment. These listings support its use as a power supply sub-assembly in appropriately configured commercial security and life-safety systems. The AL1024ULXB2 replaces the earlier Altronix AL1024ULXB, providing a replacement option for compatible installations requiring a 24VDC, 10A power supply with battery charging and supervisory functions. Unlike complete enclosed power supply systems, the AL1024ULXB2 does not include a metal cabinet, backup batteries, or separate multi-output access power control board. Installers must verify power demand, battery standby calculations, wiring protection, enclosure suitability, and applicable fire alarm or access control listing requirements before installation. The power supply is supported by Altronix's lifetime manufacturer warranty, subject to the manufacturer's warranty terms.



UPC: 782239945214
Also known as: AX-1024ULXB2, ALT-AL1024ULXB2

Technical Specifications:
  • Height: 2"
  • Depth: 8.4"
  • Width: 4.5"
  • Transformer Type: DC
  • Series: Altronix Power Supplies
  • Limited Warranty: Lifetime
  • Product Type: Proprietary Power Supply
  • Output Voltage: 24 V DC @ 8 A
  • Form Factor: Board
  • Environmentally Friendly: Yes
  • Country of Origin: United States
  • Environmental Certification: RoHS
  • Output Power: 483 W
  • Input Voltage: 120 V AC
  • Weight (Approximate): 1.20 lb


For more information about the Altronix AL1024ULXB2, please contact us.
  • 24VDC @ 8 or 10A
  • Single Output Power Supply/Board

1 Review

  • 5
    ALTRONIX-AL1024ULXB2

    Posted by 54632 on Apr 22nd 2013

Live Chat